Ip Tunnel; Ipv6Inipv4; Figure 86 - Interface Grouping Configuration; Figure 87 - Ipv6Inipv4 Tunnel List - NetCommWireless NF18ACV User Manual

Figure 86 – Interface Grouping configuration
Enter a group name and then use the arrow buttons to select which interfaces you wish to group. Click Apply/Save to save
the Interface grouping configuration settings.

IP Tunnel

The IP Tunnelling feature allows you to configure tunnelling of traffic between IPv6 and IPv4 network using a tunnelling
service.

IPv6inIPv4

To use IPv6inIPv4 tunnelling service an active subscription to a tunnelling provider are required.
Figure 87 – IPv6inIPv4 Tunnel list
VDSL/ADSL2+ Dual Band AC1600 Gigabit Gateway with VoIP 71 of 131
© NetComm Wireless 2017