Wireless - Security; Figure 95 - Wireless Security - NetCommWireless NF18ACV User Manual

Wireless – Security
The NF18ACV supports all encryptions within the 802.11 standard. The factory default is WPA2-PSK. The NF18ACV also
supports: WPA, WPA-PSK, WPA2 or WPA2-PSK
You can also select to disable WPS mode.
The following parameters are available:
Parameter
Enable WPS
Select SSID
Network Authentication
WPA/WAPI passphrase
WPA Group Rekey Interval Enter the group rekey interval. This should not need to change.
WPA/WAPI Encryption
VDSL/ADSL2+ Dual Band AC1600 Gigabit Gateway with VoIP
Figure 95 – Wireless Security
Select to enable or disable the WPS function of the NF18ACV.
Select the SSID to apply the security settings to.
Select the Wireless security type to use with the wireless network.
The default is WPA2-PSK.
The NF18ACV also supports: WPA, WPA-PSK, WPA2, WPA2-PSK
Enter the security key to use with the wireless network.
Select the type of encryption to use on the wireless network.
Definition
79 of 131
© NetComm Wireless 2017