Dsl; Figure 76 - Dsl Settings Page; Table 25 - Dsl Settings Table - NetCommWireless NF18ACV User Manual

DSL

This page allows you to modify the DSL modulation settings on the unit. By changing the settings, you can specify which DSL
modulation that the modem will use.
Not all modulation types are support by your local DSLAM equipment, check with your ISP for supported modulation types.
Field
Modulation
Profile
USO
Phone line type
Capability
Apply/Save button
Advanced Settings button
VDSL/ADSL2+ Dual Band AC1600 Gigabit Gateway with VoIP
Figure 76 – DSL settings page
A user defined name for the policy route.
The LAN port to be used for the policy.
The IP address of the LAN device involved with the policy.
Select the Interface that the policy will employ.
Enter the gateway address.
Click the Apply/Save button to initiate the change.
Allow configuration of the Modem state for diagnostic purposes.
Table 25 – DSL settings table
Description
65 of 131
© NetComm Wireless 2017