Figure 94 - Wireless - Basic Configuration; Table 29 - Basic Wireless Settings Table - NetCommWireless NF18ACV User Manual

The following parameters are available:
Parameter
Enable Wireless
Hide Access Point
Clients Isolation
Disable WMM Advertise
Enable Multicast
Forwarding (WMF)
Max Clients
Wireless Guest / Virtual
Access Points
Click Apply/Save to save the new wireless configuration settings.
Note – Hiding the network may leads to potential connection problems, a non-broadcast network is not undetectable, and hiding a
SSID is Security through obscurity
78 of 131
© NetComm Wireless 2017
Figure 94 – Wireless - Basic Configuration
Select  Enable Wireless to activate the wireless network function.
Select  to hide the wireless network when an SSID scan is performed.
Select  to prevent clients on the wireless network being able to access
each other.
Select  to prevent the NF18ACV advertising its WMM QoS function
Wireless Multicast Forwarding can reduce latency and improve
throughput for wireless clients.
Enter the maximum number of wireless clients able to connect to the
wireless network
Select to enable a separate Wireless Guest network.
For each Guest network enter the same options as are available in the top
of this page for the main system wireless network.
Table 29 – Basic Wireless settings table
Definition
User Guide