Advertisement
Wireless Setup guide
Login to Web User Interface
1
Connect a computer and the NF10WV using an Ethernet cable. (A yellow Ethernet cable was provided with your
NF10WV).
2
Open a web browser (such as Google Chrome or Mozilla Firefox), type following address into the address bar and
press Enter.
http://192.168.20.1
3
Enter the following credentials in the User Name and Password fields:
User Name:
admin
Password:
admin
Note – If no authentication prompt is displayed or you see a request time out message, refer to
Interface guide" from FAQs section
Login screen
.
Wireless Setup Guide
NF10WV FAQs
"What if I cannot access Web User
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for NetCommWireless NF10WV
Summary of Contents for NetCommWireless NF10WV
- Page 1 Wireless Setup guide Login to Web User Interface Connect a computer and the NF10WV using an Ethernet cable. (A yellow Ethernet cable was provided with your NF10WV). Open a web browser (such as Google Chrome or Mozilla Firefox), type following address into the address bar and press Enter.
- Page 2 Wireless – Basic Navigate to Wireless > Basic. Confirm that Enable Wireless and Enable Wireless Multicast Forwarding (WMF) are selected. The default SSID (network name) on this example is “NetComm 8386”. You may change the SSID and press the “Apply/Save”...
- Page 3 The configuration in the modem is now complete. Use computer/laptop, mobile or iPad to scan Wi-Fi network name, select the right Wi-Fi network name/ SSID (Example: NetComm 8386) enter the displayed Wi-Fi password to join the network. NF10WV FAQs 3 of 6...
- Page 4 Connecting to your Wireless Network Use computer/laptop, mobile or iPad to scan Wi-Fi network name, select the right Wi-Fi network name/ SSID (e.g. NetComm 8386) enter the displayed Wi-Fi password to join the network. Windows 10 The following is an example of connecting to the WiFi network using Windows 10. Click the wireless symbol in the bottom right corner of the device.
- Page 5 The word Connected will appear under your WiFi network name/SSID [4] when the connection is successful. If you are facing difficulty to connect the Wi-Fi network name, refer to “Wireless Troubleshooting Guide” from FAQs section. NF10WV FAQs 5 of 6 © NetComm Wireless 2017...
- Page 6 MacOS Click on the Airport/Wi-Fi icon at the top right corner of the screen as shown below. Click Turn Wi-Fi On. you cannot see an Airport icon, your wireless adapter may not be installed or inserted correctly. Note – If Please refer to your Mac user guide before continuing with the steps in this guide A list of Wi-Fi networks including your WiFi network name/SSID is displayed (in this example, it is “NetComm 8386”).
Need help?
Do you have a question about the NF10WV and is the answer not in the manual?
Questions and answers