Figure 45 - Nat -- Virtual Server Configuration Page; Table 16 - Nat -- Virtual Server Settings Table - NetCommWireless NF18ACV User Manual

Field
Select a Service or custom
Server
Server IP Address
External Port Start
External Port End
Protocol
Internal Port Start
Internal Port End
Click Save/Apply to save your settings when you have finished creating virtual servers.
46 of 131
© NetComm Wireless 2017
Figure 45 – NAT -- Virtual Server Configuration page
Select a pre-configured port forwarding rule or choose custom server to
create your own port forwarding rule.
Enter the IP address of the local server/host.
Enter the starting external port number range (when custom server is
selected). When a predefined service is selected this field will be
completed automatically.
Enter the ending external port number range (when custom server is
selected). When a predefined service is selected this field will be
completed automatically.
Options include: TCP, UDP or TCP/UDP
Enter the starting internal port number range(when custom server is
selected). When a predefined service is selected this field will be
completed automatically.
Enter the ending internal port number range (when custom server is
selected). When a predefined service is selected this field will be
completed automatically.
Table 16 – NAT -- Virtual Server settings table
Description
User Guide