Maintenance And Repairs; Disposal - Stihl TS 440 Instruction Manual

English
Diamond cutting wheels
Minimum outside diameter of
thrust washers:
Max. possible depth of cut: 4.9 in.
STIHL offers diamond cutting wheels
that are suitable for cutting the following
materials with the TS 440:
Asphalt
–
Concrete
–
Stone (hard rock)
–
Abrasive concrete
–
Green concrete
–
Clay bricks
–
Clay pipes
–
Ductile iron
–
Structural steel up to 10 mm thick
–
For more information and a full list of
approved cutting attachments see your
authorized STIHL dealer.
52

Maintenance and Repairs

4.06 in.
(103 mm)
Users of this unit should carry out only
the maintenance operations described
(125 mm)
in this manual. STIHL recommends that
other repair work be performed only by
authorized STIHL servicing dealers
using genuine STIHL replacement parts.
Genuine STIHL parts can be identified
by the STIHL part number, the
{ logo and, in some cases, by
the STIHL parts symbol K. The
symbol may appear alone on small
parts.
For repairs of any component of this
unit's air emissions control system,
please refer to the air emissions
systems warranty in this manual.

Disposal

Observe all country-specific waste
disposal rules and regulations.
STIHL products should be disposed of in
approved disposal sites for recycling.
Contact your authorized STIHL
servicing dealer for the latest information
on waste disposal.
TS 440