Outside Appearance; Operator Panel; Cnc Unit - Siemens YASKAWA 840DI Maintenance Manual

1.2 Outside appearance

1.2

Outside appearance

1.2.1
1.2.2
Connector for external floppy disk drive
The figures are described roughly in the following subsections. Therefore, its image may be
different from the actual unit.

Operator panel

The operator panel has CNC unit on the rear side and they are treated as a unit.
LCD
USB port

CNC unit

The CNC unit is installed on the rear side of operator panel and they are treated as a unit.
Rear view
Other connectors
Table 1.1 Operator panel
Type/
General name
Order number
Operator 6FC5203-0AF10-
panel
xAAx
Table 1.2 CNC unit
Type/
General name
Order number

CNC unit

6FC5220-0AAxx
-xAA0
6FC5210-0DFxx
-xAA0 (spare part)
1-4
Specifications/
Remarks
x: There are several kinds
depending on improvement
of key illustration and key
position.
Specifications/
Remarks
x: There are several kinds
depending on the
performance and installed
OS.