Download  Print this page

Advertisement

Table of Contents

FOREWORD

This handbook contains information on the Triumph America and Speedmaster motorcycles.
Always store this owner's handbook with the motorcycle.
Warnings, Cautions and
Notes
Throughout
this
particularly
important
presented in the following form:
Warning
This warning symbol identifies special
instructions or procedures, which, if not
correctly followed, could result in personal
injury, or loss of life.
owner's
handbook
information
This caution symbol identifies special
is
instructions or procedures, which, if not
strictly observed, could result in damage to,
or destruction of, equipment.
Note:
This note symbol indicates points
of particular interest for more
efficient and convenient operation.
Foreword
Caution
1

Advertisement

Table of Contents

   Also See for Triumph America

   Summary of Contents for Triumph America

  • Page 1: Foreword

    Foreword FOREWORD This handbook contains information on the Triumph America and Speedmaster motorcycles. Always store this owner's handbook with the motorcycle. Warnings, Cautions and Notes Caution Throughout this owner's handbook This caution symbol identifies special particularly important information instructions or procedures, which, if not...
  • Page 2: Warning Labels

    Maintenance To ensure a long, safe and trouble free life for your motorcycle, maintenance should always be carried out by an authorised Triumph dealer. Only an authorised Triumph dealer will have the necessary knowledge, equipment and skills to maintain your Triumph motorcycle correctly.
  • Page 3 • German; The information contained in this publication • Italian; is based on the latest information available at the time of printing. Triumph reserves the • Japanese; right to make changes at any time without • Spanish; prior notice, or obligation.
  • Page 4: Table Of Contents

    Foreword Table of Contents This handbook contains a number of different sections. The table of contents below will help you find the beginning of each section where, in the case of the major sections, a further table of contents will help you find the specific subject required. Foreword .
  • Page 5: The Motorcycle

    Foreword - Safety First FOREWORD - SAFETY FIRST The Motorcycle Fuel and Exhaust Fumes Warning Warning This motorcycle is designed for on-road PETROL IS HIGHLY FLAMMABLE: use only. It is not suitable for off-road use. Always turn off the engine when refuelling. Off-road operation could lead to loss of Do not refuel or open the fuel filler cap control of the motorcycle resulting in an...
  • Page 6 Foreword - Safety First Riding Warning Warning This Triumph motorcycle should operated within the legal speed limits for Never ride the motorcycle when fatigued the particular road travelled. or under the influence of alcohol or other Operating a motorcycle at high speeds can drugs.
  • Page 7: Helmet And Clothing

    Foreword - Safety First Helmet and Clothing Handlebars and Footrests Warning Warning When riding the motorcycle, both rider The rider must maintain control of the and passenger must always wear a vehicle keeping hands motorcycle helmet, eye protection, gloves, handlebars at all times. trousers (close fitting around the knee and The handling and stability of a motorcycle ankle) and a brightly coloured jacket.
  • Page 8: Parts And Accessories

    By removing the key, the risk conversions for any Triumph motorcycle of use of the motorcycle by unauthorised are those which carry official Triumph or untrained persons is reduced. approval and are fitted to the motorcycle by an authorised dealer.
  • Page 9 Foreword - Safety First Maintenance/Equipment Warning Warning Ensure all equipment that is required by law is installed and functioning correctly. Consult your authorised Triumph dealer removal alteration whenever there is doubt as to the correct motorcycle’s lights, silencers, emission or safe...
  • Page 10: Warning Labels

    Warning Labels WARNING LABELS Warning Label Locations - America and Speedmaster The labels detailed on this and the following pages draw your attention to important safety information in this handbook. Before riding, ensure that all riders have understood and complied with all the information to which these labels relate.
  • Page 11 Warning Labels WARNING LABELS Warning Label Locations - America and Speedmaster (continued) Helmet Unleaded Fuel (page 7) (page 28) Gear Position (page 39)
  • Page 12: Parts Identification

    Parts Identification PARTS IDENTIFICATION Parts Identification - America and Speedmaster 1. Front indicator 9. Front brake caliper 2. Headlight 10.Fuel tank 3. Rear light 11. Fuel filler cap 4. Oil cooler 12.Battery 5. Rear indicator 13.Rear brake caliper 6. Side stand 14.Rear brake disc...
  • Page 13 Parts Identification PARTS IDENTIFICATION Parts Identification - America and Speedmaster (continued) 17. Steering lock 22.Oil level sight glass 18.Drive chain 23.Front fork 19.Rear brake fluid reservoir 24.Rear suspension unit 20.Rear brake pedal 25.Silencer 21. Oil filler plug...
  • Page 14 Parts Identification Parts Identification - America and Speedmaster (continued) 2 3 4 T9080006USA 1. Clutch lever 7. Warning lights 2. Headlight dip switch 8. Front brake fluid reservoir 3. Direction indicator switch 9. Front brake lever 4. Horn button 10.Engine stop switch 5.
  • Page 15: Serial Numbers

    Serial Numbers SERIAL NUMBERS Vehicle Identification Engine Serial Number Number (VIN) ccil 1. Engine serial number cebr The engine serial number is stamped on the 1. VIN number stamping crankcase, immediately above the drive chain sprocket cover. Record the vehicle identification number in the space below.
  • Page 16 Serial Numbers This page intentionally left blank...
  • Page 17: General Information

    America and Speedmaster ........
  • Page 18 America Handbook Storage ........
  • Page 19: Instruments

    General Information Instruments America and Speedmaster cekv 1. Speedometer 6. High beam indicator light 2. Odometer 7. Direction indicator light 3. Low fuel level indicator light 8. Neutral indicator light 4. Engine management malfunction 9. Low oil pressure warning light indicator light (MIL) 10.Reset button...
  • Page 20: Speedometer

    General Information Speedometer Warning The speedometer indicates the road speed of the motorcycle. Do not attempt to switch between odometer and trip meter display modes or Odometer/Trip Meter reset the trip meter with the motorcycle in motion as this may lead to loss of motorcycle control and an accident.
  • Page 21: Clock Adjustment

    General Information Clock Adjustment 6 seconds and the display will cease to flash automatically. Warning Do not attempt to adjust the clock with the motorcycle in motion as this may lead to loss of motorcycle control and an accident. To set the clock, turn the ignition to the ON position.
  • Page 22: Warning Lights

    Contact an authorised set to 'high beam', the high beam warning Triumph dealer as soon as possible to have light will illuminate. the fault checked and rectified. Neutral...
  • Page 23: Ignition Key

    Triumph accessory alarm. Make a note of the key number and store the spare key, key blade and key number tag in a safe place away from the motorcycle.
  • Page 24: Ignition Switch

    General Information Ignition Switch Ignition Switch Positions Engine off. All electrical circuits off. Engine electrical equipment can be used. Engine off. Tail, side and licence plate lights on, all other electrical circuits cut off. Warning T908011 For reasons of security and safety, always 1.
  • Page 25: Steering Lock Key

    (at safe place away from the motorcycle. which point the lock will turn and move Your authorised Triumph dealer can supply a inwards). replacement key cut from details of the key To disengage the steering lock, insert the key,...
  • Page 26: Right Handlebar Switches

    Engine Stop Switch • Light switches are no longer fitted to any Triumph model. Instead, the In addition to the ignition switch head and tail lights automatically being turned to the ON position, come on when the ignition is in the engine stop switch must be in the RUN the ON position.
  • Page 27: Left Handlebar Switches

    General Information Left Handlebar Switches Brake and Clutch Lever Adjusters cbmk 1. Headlight dip switch cbmi 2. Direction indicator switch 3. Horn button 1. Lever adjuster wheel Headlight Dip Switch An adjuster is fitted to the front brake and clutch levers on both models. The adjusters High or low beam can be selected allow the distance from the handlebar to the with the headlight dip switch.
  • Page 28: Fuel

    Fuel Grade loss of control and an accident. Your Triumph engine is designed to use After adjusting the levers, operate the unleaded fuel and will give optimum motorcycle in an area free from traffic to performance if the correct grade of fuel is gain familiarity with the new lever settings.
  • Page 29: Refuelling

    General Information Refuelling Fuel Tank Cap Warning To help reduce hazards associated with fuel handling, always observe the following fuel safety instructions: Petrol (fuel) is highly flammable and can be explosive under certain conditions. When refuelling, turn the ignition switch to the OFF position.
  • Page 30: Filling The Fuel Tank

    General Information Filling the Fuel Tank Avoid filling the tank in rainy or dusty Warning conditions where airborne material can Overfilling the tank can lead to fuel contaminate the fuel. spillage. If petrol (fuel) is spilled, thoroughly wipe off Caution the spilled fuel immediately and dispose of the cleaning cloth safely.
  • Page 31: Side Cover: Right Hand Side Cover

    To prevent damage to the seat cover, care necessary to remove the right hand side must be taken not to drop or lean the seat cover from the America and Speedmaster against any surface which may damage the models, except for major service or repair seat or seat cover.
  • Page 32: Seat - America

    'How to Ride the Motorcycle' section. Seat - America Note: Warning • On America models, under normal The motorcycle is fitted with an interlock circumstances, it is not necessary system to prevent it from being ridden to remove the seat to gain access with the side stand in the down position.
  • Page 33: Owner's Handbook

    T908021USA beneath the seat. To store the handbook, place it back in the 1. Owner’s handbook storage - America space beneath the seat, then refit the seat as The motorcycle owner's handbook is stored described under 'seat refit' (see page 31).
  • Page 34: Running-in

    General Information Running-In Both during and after running-in has been completed: Running-in is the name given to the process • Do not over-rev the engine when that occurs during the first hours of a new cold. vehicle's operation. • Do not let the engine labour. Always In particular, internal friction in the engine will downshift before the engine begins be higher when components are new.
  • Page 35: Safe Operation

    (page 69). Adjustment section or see your authorised Brake Pads: There should be more than Triumph dealer for the action required to 1.5 mm of friction material remaining on all return the motorcycle to a safe operating the pads (page 69).
  • Page 36 General Information This page intentionally left blank...
  • Page 37: How To Ride The Motorcycle

    How to Ride the Motorcycle HOW TO RIDE THE MOTORCYCLE Table of Contents To Stop The Engine ............36 To Start The Engine .
  • Page 38: To Stop The Engine

    How to Ride the Motorcycle 1. Engine stop switch To Start The Engine 2. Starter button • Release the steering lock. 3. Neutral indicator light • Check that the engine stop switch is 4. Choke in the RUN position. 5. Ignition switch •...
  • Page 39: Moving Off/changing Gears

    Caution • If the side stand is extended whilst This Triumph motorcycle is air cooled and the engine is running, and the consequently requires air-flow over the transmission is not in neutral then cylinders and head to maintain correct the engine will stop regardless of engine operating temperature.
  • Page 40 How to Ride the Motorcycle Warning Take care to avoid opening the throttle too far or too fast in any of the lower gears as this can lead to the front wheel lifting from the ground ('pulling a wheelie') and the rear tyre breaking traction (wheel spin).
  • Page 41: Braking

    Riders should practice T908025 emergency braking in a traffic-free area. Triumph strongly recommend that all 1. Front brake lever riders take a course of instruction which includes advice on safe brake operation.
  • Page 42 How to Ride the Motorcycle Warning Warning For your safety, always exercise extreme When descending a long, steep gradient, caution when braking, accelerating or use engine braking by down changing and turning as any incautious action can cause use the brakes intermittently. Continuous loss control accident.
  • Page 43: Parking

    How to Ride the Motorcycle Parking Warning Do not park on a soft or on a steeply inclined surface. Parking under these conditions may cause the motorcycle to fall over causing damage to property and personal injury. Warning Petrol is extremely flammable and can be explosive under certain conditions.
  • Page 44: Considerations For High-speed Operation

    A problem which may not be noticed at normal Warning operating speeds greatly Only operate this Triumph motorcycle at exaggerated at high speeds. high speed in closed-course on-road competition or on closed-course racetracks. General High-speed operation should only then be...
  • Page 45: Brakes

    How to Ride the Motorcycle Brakes Engine Oil Check that the front and rear brakes are Make certain that the oil level is correct. functioning properly. Ensure that the correct grade and type of oil is used when topping up. Tyres Electrical Equipment High-speed operation is hard on tyres, and...
  • Page 46 How to Ride the Motorcycle This page intentionally left blank...
  • Page 47: Accessories, Loading And Passengers

    Accessories and Loading ACCESSORIES AND LOADING The addition of accessories and carriage of additional weight can affect the motorcycle's Warning handling characteristics causing changes in stability and necessitating a reduction in Do not install accessories or carry luggage speed. The following information has been that impairs the control of the motorcycle.
  • Page 48 The rider should instruct the passenger as follows: Warning • It is important that the passenger Only operate this Triumph motorcycle at sits still while the motorcycle is in high speed in closed-course on-road motion and does not interfere competition or on closed-course racetracks.
  • Page 49 Accessories and Loading Warning Warning Do not carry a passenger unless he or she If the passenger seat is used to carry small is tall enough to reach the footrests objects, they must not exceed 5 kg in provided. weight, must not impair control of the motorcycle, must be securely attached and A passenger who is not tall enough to must not extend beyond the rear or sides...
  • Page 50 Accessories and Loading This page intentionally left blank...
  • Page 51: Maintenance And Adjustment

    Maintenance and Adjustment MAINTENANCE AND ADJUSTMENT Table of Contents Scheduled Maintenance............53 Recording Scheduled Maintenance .
  • Page 52 Maintenance and Adjustment Suggested Suspension Settings ..........75 Tyres .
  • Page 53: Maintenance And Adjustment

    Only an authorised scheduled maintenance chart. Triumph dealer will have this knowledge information that follows describes and equipment. procedures to follow when carrying out the...
  • Page 54 Maintenance and Adjustment Operation Description Odometer Reading in Miles (Kms) or Time Period, whichever comes first First Service A Service B Service C Service D Service Every 6,000 12,000 18,000 24,000 (800) (10,000) (20,000) (30,000) (40,000) 1 month 1 year 2 years 3 years 4 years...
  • Page 55 Maintenance and Adjustment Operation Description Odometer Reading in Miles (Kms) or Time Period, whichever comes first First Service A Service B Service C Service D Service Every 6,000 12,000 18,000 24,000 (800) (10,000) (20,000) (30,000) (40,000) 1 month 1 year 2 years 3 years 4 years...
  • Page 56: Recording Scheduled Maintenance

    Triumph dealer carry out the scheduled maintenance of Service Handbook Entry this motorcycle. Each time you visit your authorised Triumph Triumph Motorcycles cannot accept any dealer for scheduled servicing, always present responsibility for damage or injury resulting...
  • Page 57: Engine Oil

    Maintenance and Adjustment Engine Oil T908027 Warning 1. Filler Motorcycle operation with insufficient, 2. Sight glass deteriorated, or contaminated engine oil 3. Oil level (correct level shown) will cause accelerated engine wear and 4. Crankcase oil level lines may result in engine or transmission seizure.
  • Page 58: Oil Level Inspection

    Maintenance and Adjustment Oil Level Inspection Oil and Oil Filter Change • Start the engine and run at idle for approximately five minutes. • Stop the engine, then wait for at least three minutes to allow the oil to settle. •...
  • Page 59 • Unscrew and remove the oil filter seizure. Only raise engine speed after using the Triumph service tool running the engine for 30 seconds to allow T3880313. the oil to circulate fully. •...
  • Page 60: Disposal Of Used Engine Oil

    Caution If the engine oil pressure is too low, the low oil pressure warning light will illuminate. If Triumph high performance engines are this warning light stays on when the designed to use semi or fully synthetic engine is running, stop the engine 10W/40 or 15W/50 motorcycle engine oil immediately and investigate the cause.
  • Page 61: Throttle Grip

    Always be alert for changes in the 'feel' of authorised Triumph dealer. However, the throttle and have the throttle system emergency, throttle checked by an authorised Triumph dealer adjustments made if any changes are detected. Changes can follows: be due to wear in the mechanism, which could lead to a sticking throttle.
  • Page 62: Adjustment

    To avoid incorrect adjustment, incorrect routing, or continued use of a sticking or damaged throttle, always have the throttle checked and adjusted by your authorised Triumph dealer. ccip1 Note: 1. Locknuts 2. Opening cable adjuster •...
  • Page 63: Clutch

    Triumph dealer and have cable-operated clutch. him check the throttle system If the clutch lever has excessive free play, the thoroughly before riding again. clutch may not disengage fully and could then cause the engine to stall and create difficulties when changing gear.
  • Page 64: Inspection

    Maintenance and Adjustment Inspection Adjustment cbmy T908034 1. Lever 1. Adjuster (engine end) 2. Adjuster (lever end) • Loosen the knurled locknut at the 3. 2 - 3 mm lever end of the clutch cable and turn the adjuster sleeve until the •...
  • Page 65: Drive Chain

    Maintenance and Adjustment Drive Chain Chain Lubrication Lubrication is necessary every 200 miles For safety and to prevent excessive wear, the (300 kms) and also after riding in wet drive chain must be checked, adjusted, and weather, on wet roads, or any time that the lubricated in accordance with scheduled chain appears dry.
  • Page 66: Chain Free-movement

    Maintenance and Adjustment Chain Free-Movement Adjustment • chain free-movement measurement incorrect, adjustments must be made as follows: • Loosen the wheel spindle nut. • Moving both adjusters by an equal amount, turn the adjuster bolts clockwise increase chain free-movement and anti-clockwise to reduce chain free-movement.
  • Page 67: Chain Wear Inspection

    Maintenance and Adjustment • Rotate the rear wheel and repeat the Chain Wear Inspection chain adjustment check. Re-adjust if necessary. Warning Operation of the motorcycle with a loose wheel spindle may result in impaired stability and handling of the motorcycle. This impaired stability and handling may lead to loss of control or an accident.
  • Page 68 Either condition could lock the rear wheel, severely damaging the motorcycle and causing loss of control and an accident. For safety, use a genuine Triumph supplied chain as specified in the Triumph parts catalogue. Never neglect chain maintenance and always have chains installed by an authorised Triumph dealer.
  • Page 69: Brakes

    It is dangerous to operate the motorcycle under such conditions and remedial action must be taken by your authorised Triumph dealer before riding. Riding with defective brakes may lead to loss of motorcycle control and an accident.
  • Page 70: Brake Light Switches

    Triumph dealer pressed, ask your authorised Triumph dealer before riding. Riding with depleted brake to investigate and rectify the fault.
  • Page 71: Front Brake Fluid Level Inspection And Adjustment

    Maintenance and Adjustment Front Brake Fluid Level Inspection Rear Brake Fluid Level Inspection and Adjustment and Adjustment ccit T908040 1. Upper level, rear brake 2. Lower level, rear brake 1. Upper level line, front brake • The rear brake fluid level is visible 2.
  • Page 72: Steering/wheel Bearings

    Maintenance and Adjustment • Refit the reservoir cap ensuring that Steering/Wheel Bearings the diaphragm seal is correctly positioned between the cap and Steering Inspection reservoir body. Lubricate and inspect the condition of the • Locate the black reservoir cover, headstock (steering) bearings in accordance position the assembly to the frame with scheduled maintenance requirements.
  • Page 73: Wheel Bearings Inspection

    If the wheel bearings in the front or rear wheel allow play in the wheel hub, are noisy, or if the wheel does not turn smoothly, have your authorised Triumph dealer inspect the wheel bearings. The wheel bearings must be inspected at the...
  • Page 74: Front Suspension

    Suspension Setting The America and Speedmaster models both have non-adjustable front suspension. Warning Ensure that the adjusters are set to the Warning same setting on both rear suspension units. Settings which vary from left to right...
  • Page 75: Suggested Suspension Settings

    Maintenance and Adjustment Suggested Suspension Settings Tyres Rear adjuster settings are counted from one with position one being with the adjuster turned fully anti-clockwise. There are five adjuster positions in total. Position one gives the minimum amount of spring pre-load. Loading Rear Adjuster Condition...
  • Page 76: Tyre Inflation Pressures

    Check tyre pressures daily and adjust if tread depth specified in the table below: necessary (see Specification section for correct inflation pressures). Alternatively, ask your authorised Triumph dealer to inspect Under 130 km/h 2 mm (0.08 in) your wheels and tyres.
  • Page 77: Tyre Replacement

    It is essential that approved tyres, Triumph dealer to inspect the tyre both fitted in approved combinations, are used internally and externally. Remember, tyre when purchasing replacement items. The use...
  • Page 78 Maintenance and Adjustment Warning Warning When replacement tyres are required, Tyres that have been used on a rolling consult your authorised Triumph dealer road dynamometer become who will arrange for the tyres to be damaged. In some cases, the damage may...
  • Page 79: Battery

    Maintenance and Adjustment Battery Battery Disposal Warning Under some circumstances, the battery can give off explosive gases; keep sparks, flames cigarettes away. Provide adequate ventilation when charging or using the battery in an enclosed space. battery contains sulphuric acid (battery acid). Contact with skin or eyes may cause severe burns.
  • Page 80: Battery Removal

    Maintenance and Adjustment Battery Removal • Ease the cover outwards from the motorcycle releasing a stud, located at the rear of the cover, from its grommet. • Remove the fixing from the battery cover strap. • Detach the strap from its lower hinge and remove the battery cover.
  • Page 81: Battery Maintenance

    Maintenance and Adjustment Battery Maintenance of battery discharge. Disconnecting the battery from the motorcycle during storage Clean the battery using a clean, dry cloth. Be will reduce the rate of discharge. sure that the cable connections are clean. Battery Discharge During Storage and Infrequent Use of the Warning Motorcycle...
  • Page 82: Battery Charging

    Caution Do not use an automotive quick charger as it may overcharge and damage the battery. Should the battery Voltage fall below 12.7 Volts, the battery should be charged using a Triumph approved battery charger. Always remove battery from motorcycle...
  • Page 83: Battery Installation

    Maintenance and Adjustment Battery Installation Fuses • Ensure the Engine Control Module Fuse Location (ECM) and its rubber cover are correctly located behind the battery. To access the fuses, ease the ignition switch • Place the battery onto the battery finisher outwards from the bottom.
  • Page 84: Fuse Replacement

    Maintenance and Adjustment Fuse Replacement A blown fuse is indicated when all of the systems protected by that fuse become If a fuse fails during operation, inspect the inoperative. When checking for a blown fuse, electrical system to determine the cause, and use the table below to establish which fuse then replace it with a new fuse of the same has blown.
  • Page 85: Headlight

    Maintenance and Adjustment Headlight Headlight Adjustment • Horizontal adjustment headlight beam is controlled by the Warning position of the bracket on which the headlight is mounted. To adjust the Adjust road speed to suit the visibility and horizontal position of the headlight, weather conditions in which the motorcycle slacken the bracket retaining bolt is being operated.
  • Page 86: Headlight/position Light Bulb Replacement

    Maintenance and Adjustment Headlight/Position Light Bulb • Installation is the reversal of removal. Replacement T908049 cebs 1. Wire retainer 2. Headlight bulb 1. Headlight rim screws 3. Position light 2. Headlight bowl • Disconnect the battery, negative (black) lead first. Warning •...
  • Page 87: Rear Light/licence Plate Light

    Maintenance and Adjustment Rear Light/Licence Plate Direction Indicator Lights Light T908051USA T908050USA 1. Indicator lens screw 2. Bulb 1. Rear light lens screws 2. Bulb Bulb Replacement Bulb Replacement • The lens on each indicator light is held in place by screws. •...
  • Page 88: Cleaning

    Maintenance and Adjustment Cleaning dust, which may then scratch painted or polished surfaces, if the same sponges or Frequent, regular cleaning is an essential part cleaning cloths are used. of the maintenance of your motorcycle. If regularly cleaned, the appearance will be Where to be Careful preserved for many years.
  • Page 89: After Washing

    Maintenance and Adjustment After Washing Cleaning of Exhaust System • Remove the rubber bands, plastic All parts of the exhaust system of your bags and tape, and clear the air motorcycle must be cleaned regularly to intakes. avoid a deterioration of its appearance. •...
  • Page 90: Accessory Windscreen Cleaning

    Maintenance and Adjustment If the transparency of the windscreen is reduced by scratches or oxidation which Caution cannot be removed, the windscreen must be replaced. The use of products containing silicone will cause discolouration of the chrome and must not be used. Similarly, the use of Warning abrasive cleaners and polishes will damage the system and must not be used.
  • Page 91: Storage

    Storage STORAGE Preparation for Storage unpainted metal surfaces to prevent rusting. Prevent oil from getting on rubber parts, Clean the entire vehicle thoroughly. brake discs or in the brake calipers. Fill the fuel tank with the correct grade of Lubricate and if necessary adjust the drive unleaded fuel and add a fuel stabiliser (if chain (see page 65).
  • Page 92 Storage This page intentionally left blank...
  • Page 93: Specifications

    Specifications SPECIFICATIONS America Speedmaster Performance Maximum Power ....61 PS @ 6,800 rpm 61 PS @ 6,800 rpm Maximum Torque ....
  • Page 94 Specifications America Speedmaster Lubrication Lubrication System ....Wet-sump Wet-sump Engine Oil Capacity Guidelines (dry fill)......
  • Page 95 Specifications All Models Fuel System Type ....... . . Sequential electronic fuel injection Fuel Pump .
  • Page 96 Specifications America Speedmaster Transmission Transmission Type ....5 Speed, Constant 5 Speed, Constant Mesh Mesh Clutch Type ..... . .
  • Page 97 Specifications America Speedmaster Tyres Tyre Pressures (Cold) Front ......36 lb/in (2.50 bar) 36 lb/in (2.50 bar)
  • Page 98: Tightening Torques

    Specifications All Models Electrical Equipment Battery ....... 12V 10 Ah Alternator.
  • Page 99 Engine Oil ......57 Removal - America and Speedmaster 80 Disposal of Used Engine Oil ..60 Brakes .
  • Page 100 Index Ignition ......95 Safe Operation ..... 35 Key .
  • Page 101 Tyre Replacement ....77 Warning Label Location - America and Tyre Wear ..... 76 Speedmaster .
  • Page 102 Index This page intentionally left blank...

Comments to this Manuals

Symbols: 0
Latest comments: