Set Up Menu; Clock Adjustment - Triumph Daytona 675 2014 Owner's Handbook Manual

General Information

Set Up Menu

To access the set up menu, turn the
ignition to the ON position.
Press and release button A until SEt UP
is visible in the display screen then press
button B.
Press and release button A until the
desired set up menu item is displayed
then press button B to enter the
selected items sub menu.
The display will scroll through in the
following order:
• t-SEt (clock adjustment,
page 40)
• UnitS (change units, see page 41)
• Lap (lap timer on/off, see page 34)
• ABS (disable ABS, see page 33)
• SHIFt (gear shift lights see page 43)
• Odometer (see page 30)
• SIA (Service Interval Announcement,
see page 45)
• rEturn (Return to Trip 1 display, see
page 45).
40

Clock Adjustment

Warning
Do not attempt to adjust the clock
with the motorcycle in motion as this
may lead to loss of motorcycle control
and an accident.
To reset the clock, with the motorcycle
stationary and in neutral turn the
ignition to the ON position. Press and
release button A until SEt UP is visible in
the display screen. Press button B and
see
t-SEt will be visible.
Press button B again and either 24 Hr or
12 Hr clock will be shown. Press button A
to select the desired clock display and
then press button B. The hour display
will start to flash and the word Hour is
visible in the display screen.
To reset the hour display, ensure that
the hour display is still flashing and the
word Hour is visible. Press button A to
change the setting. Each individual
button press will change the setting by
one digit. If the button is held, the
display will continuously scroll through
in single digit increments.
When the correct hour display is shown,
press button B. The minutes display will
begin to flash and the word Min is visible
in the display screen. The minutes
display is adjusted in the same way as
for the hours.