Protech Systems PA-6822 User Manual page 99

ESC FF
[Name] Print data in page mode.
ASCII
[Format] Hex.
Decimal
[Range] N/A
Prints all buffered data in the print area collectively in page mode.
This command is enabled only in page mode.
Holds the following information after printing.
[Description]
ESC SP n
[Name] Set right-side character spacing.
ASCII
[Format] Hex.
Decimal
0 ≤ n ≤ 255
[Range]
Initial Value n = 0
This command sets the size of space to right of character.
[Description]
Right space = n × [horizontal motion units].
ESC ! n
[Name] Select print mode(s).
ASCII
[Format] Hex.
Decimal
0 ≤ n ≤ 255
[Range]
Initial Value n = 0
This command selects print mode(s) with bits having following meanings.
Bit
0
1
2
3
[Description]
4
5
6
7
PA-6822 Series User Manual
ESC FF
1B 0C
27 12
a. Expanded data
b. Character print direction selection in page mode (ESC T)
c. Set print region (ESC W) in the page mode.
d. Character expansion position
ESC SP n
1B 20 n
27 32 n
ESC ! n
1B 21 n
27 33 n
On / Off Hex
Off 00
On 01
Off 00
Off 00
Off 00
On 08
Off 00
On 10
Off 00
On 20
Off 00
Off 00
On 80
Chapter 3 Software
Decimal Function
0 Character font A selected.
1 Character font B selected.
0 Not used. Fixed to Off.
0 Not used. Fixed to Off.
0 Emphasized mode not selected.
8 Emphasized mode selected.
0 Double-height mode not selected
16 Double-height mode selected
0 Double-width mode not selected.
32 Double-width mode selected.
0 Not used. Fixed to Off.
0 Underline mode not selected.
128 Underline mode selected.
Page