3- -1-2. OPOS Printer Driver
The MB1030_OposSetup.exe program sets up the registry information of MSRHK
reader for OPOS program uses.
1.
Installation
Below steps guide you to install the MB1030_OposSetup program.
Run the setup file MB1030_OposSetup.exe located in the Software folder of CD.
This setup also installs the MB1030 program.
Follow the wizard instructions to complete the installation.
2.
Launching Program
Below steps guide you to load the MB1030 program.
Click POSPrinter folder from the path Start\Programs\Protech OPOS.
Click MB1030 to launch the program.
PA-6822 Series User Manual
Chapter 3 Software
Page 1