Protech Systems PA-6822 User Manual page 117

GS W nL nH
[Name] Set printing area width.
ASCII
[Format] Hex.
Decimal 29 87 nL nH
[Range] 0 ≤ nL ≤ 255, 0 ≤ nH ≤ 255
[Description]
GS \ nL nH
[Name] Set relative vertical print position in page mode.
ASCII
[Format] Hex.
Decimal 29 92 nL nH
0 ≤ nL ≤ 255
[Range]
0 ≤ nH ≤ 255
Specifies the character vertical direction position for the data expansion starting
position using the relative position based on the current point in page mode. This
[Description] sets the position moved from the current position to [(nL + nH x 256) x basic
calculated pitch] for the next data expanding starting position.
GS a n
[Name] Enable/disable Automatic Status Back (ASB).
ASCII
[Format] Hex.
Decimal 29 97 n
0 ≤ n ≤ 255
[Range]
Initial Value n = 0
Selects the statuses that are targeted for transmission with the automatic status
function (ASB: Automatic Status Back).
Bits
7
6
5
[Description]
4
3
2
1
0
PA-6822 Series User Manual
GS W nL nH
1D 57 nL nH
Sets the print region width specified by nL and nH.
Print region width is [(nL + nH x 256) x basic calculated pitch].
[(nL + nH x 256) x basic calculated pitch] >=24.
GS \ nL nH
1D 5C nL nH
When not in page mode, this command is ignored.
GS a n
1D 61 n
Statuses Targeted for ASB
Undefined
Undefined
Undefined
Undefined
Continuous Paper Detector
Error
ONLINE/OFFLINE Status
Drawer kick connector pin #3
Chapter 3 Software
"0" "1"
--- ---
--- ---
--- ---
--- ---
Invalid Valid
Invalid Valid
Invalid Valid
Invalid Valid
Page