Protech Systems PA-6822 User Manual page 116

GS L nL nH
[Name] Set left margin.
ASCII
[Format] Hex.
Decimal 29 76 nL nH
0 ≤ nL ≤ 255, 0 ≤ nH ≤ 255
[Range]
Initial Value (nL + nH x 256)=0 (nL=0, nH=0)
nL and nH set the specified left margin.
The left m argin is [(nL + nH x 256) x basic calculated pitch]
[Description]
GS P x y
[Name] Set basic calculated pitch.
ASCII
[Format] Hex.
Decimal 29 80 x
0 ≤ x ≤ 255
[Range] 0 ≤ y ≤ 255
Initial Value x = 203, y = 203: EPSON targeted model print head 203 DPI
Sets the horizontal basic calculated pitch t o approximately 25.4/xmm [(1/x)
inch], and the vertical basic calculated pitch to approximately 25.4/ymm [(1/y) inch].
[Description]
x = 0: Returns the horizontal ba sic calculated pitch to its default value.
y = 0: Returns the vertical basic calculated pitch to its default value. y = 0: Returns the vertical basic calculated pitch to its default value.
GS V m
[Name] Cut paper.
ASCII
[Format] Hex.
Decimal 29 86 m ( n )
[Range] m = 0,1,48,49,65,66 0 ≤ n ≤ 255
Executes specified paper cut.
m
0 , 48
1 , 49
[Description]
65
66
PA-6822 Series User Manual
GS L nL nH
1D 4C nL nH
argin is [(nL + nH x 256) x basic calculated pitch] .
GS P x y
1D 50 x y
y
203: EPSON targeted model print head 203 DPI
the vertical basic calculated pitch to approximately 25.4/ymm [(1/y) inch].
GS V m ( n )
1D 56 m ( n )
Function
Full cut
Partial cut (one point uncut)
Feeds paper to (cutting position + [n x basic calculated pitch]) and Feeds paper to (cutting position + [n x basic calculated pitch]) and
performs a full cut
Feeds paper to (cutti ng position + [n x basic calculated pitch]) and
performs a partial cut (one point uncut)
Chapter 3 Software
o approximately 25.4/xmm [(1/x)
sic calculated pitch to its default value.
ng position + [n x basic calculated pitch]) and
(one point uncut)
Page