Protech Systems PA-6822 User Manual page 149

3. Configuration of OPOS MSR Register program
a.) Main screen buttons/items:
Button/Item
Control Object
Service Object
Service Object
Reg
 Unreg
Exit
b.) Follow the steps below to register the MSRHK OPOS information.
Step 1: Select an item in Service Object List box (left pane). Make sure the
correct item is selected.
Step 2: Click Reg
Step 3: In the OPOS MSR Setting screen, enter the device name and click OK.
PA-6822 Series User Manual
Description
(Check box) Register the OPOSMSR.ocx common
control object driver. This needs to be checked to run the
OPOS MSR Tester program.
(Left pane) The Service Object driver types. So far only
four types are supported. Each type support specific MSR
readers. For more details, please refer to the section
OPOS MSR Service Object and Method Relations.
(Right pane) The registered MSR with specified device
name.
Create a new device name for selected MSR.
Remove selected device name from registry.
End the program.
button
Chapter 3 Software
Page 1