Protech Systems PA-3122 User Manual
  1. Manuals
  2. Brands
  3. Protech Systems Manuals
  4. Touch terminals
  5. PA-3122
  6. User manual

Protech Systems PA-3122 User Manual

10.4” pos terminal powered by intel celeron j1900 quad-core
Hide thumbs
Table of Contents

Advertisement

Quick Links

USER'S
MANUAL
PA-3122
PA-3122
10.4" POS Terminal
Powered by Intel
J1900 Quad-Core
M1
®
®
Celeron

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PA-3122 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Protech Systems PA-3122

Summary of Contents for Protech Systems PA-3122

  • Page 1 USER’S MANUAL PA-3122 10.4” POS Terminal ® ® Powered by Intel Celeron J1900 Quad-Core PA-3122...
  • Page 2 PA-3122 POS System With SATA/mSATA/3COM/4USB COPYRIGHT NOTICE & TRADEMARK All trademarks and registered trademarks mentioned herein are the property of their respective owners. This manual is copyrighted June 2014. You may not reproduce or transmit in any form or by any means, electronic, or mechanical, including photocopying and recording.
  • Page 3 FCC NOTICE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

  • Page 4: Table Of Contents

    Contents TABLE OF CONTENTS CHAPTER 1 INTRODUCTION About This Manual…..............POS System Illustration…............System Specifications..............Safety Precautions…..............CHAPTER 2 SYSTEM CONFIGURATION System External I/O Port & Pin Assignment.…......Main Board Component Locations & Jumper Settings…………. Printer Board Component Locations & Pin Assignment....2-26 VFD Board Component Locations &...

  • Page 5: Chapter 1 Introduction

    CHAPTER INTRODUCTION This chapter gives you the information for the PA-3122. It also outlines the system specifications. Sections included: About This Manual POS System Illustration System Specifications Safety precautions Experienced users can jump to chapter 2 on page 2-1 for a quick start.

  • Page 6: About This Manual

    Chapter 1 Introduction 1-1. ABOUT THIS MANUAL Thank you for purchasing our PA-3122 Series System. The PA-3122 is an updated system designed to be comparable with the highest performance of IBM AT personal computers. The PA-3122 provides faster processing speed, greater expandability and can handle more tasks than before.

  • Page 7: Pos System Illustration

    Chapter 1 Introduction 1-2. POS SYSTEM ILLUSTRATION Top View Bottom View M4 * 4 Front View Rear View 286.074 Quarter View Side View 22° Unit: mm ′ Page: 1-3 PA-3122 SERIES USER S MANUAL...

  • Page 8: System Specifications

    Display LCD Interface 10.4” TFT XGA Max. Resolution 1024 x 768 800 x 600 400 cd/m2 Brightness 230 cd/m2 Signal Interface TTL (18-bit) Viewing Angel 24~30° Touch Panel 10.4” 5-wire analog resistive ′ Page: 1-4 PA-3122 SERIES USER S MANUAL...
  • Page 9 Printer 2” or 3” easy-loading thermal printer with auto-cutter MSR & i-Button ISO I ,II, III; JIS I,II and support information key RFID ISO14443A Read/Write; ISO18092 Read only Fingerprint 8-bit grayscale reader ′ Page: 1-5 PA-3122 SERIES USER S MANUAL...

  • Page 10: Safety Precautions

    Avoid exposure to sunlight for a long period of time (for example, in a closed car in summer time. Also avoid the system from any heating device.). Or do not use the PA-3122 when it has been left outdoors in a cold winter day.
  • Page 11 If heavy stains are present, moisten a cloth with diluted neutral washing agent or alcohol and then wipe thoroughly with a dry cloth. If dust is accumulated on the case surface, remove it by using a special vacuum cleaner for computers. ′ Page: 1-7 PA-3122 SERIES USER S MANUAL...

  • Page 12: Chapter 2 System Configuration

    CHAPTER SYSTEM CONFIGURATION Helpful information that describes the jumper and connector settings, component locations, and pin assignment. Sections included: External I/O Port Pin Assignment How to Set Jumpers Component Locations & Jumper Settings - Mainboard - Printer Board (peripheral device) - VFD Board (peripheral device) - MSR Board (peripheral device) Page 2-1...

  • Page 13: System External I/O Port & Pin Assignment

    COM3 DRW1 eSATA /USB DC IN Option3 Option1 Parallel Port (LPT, D-sub 25-pin) (Cash Drawer Port, from printer board) Option2 COM1 COM4 (2 x RS-232, D-sub 9-pin) Side I/O Power USB4 button Page: 2-2 ’ PA-3122 SERIES USER S MANUAL...
  • Page 14 DC IN: DC Power-In Port (rear IO) ASSIGNMENT ASSIGNMENT +24V +24V DC IN 2-1-3. VGA Port VGA: VGA Port, D-Sub 15-pin (rear IO) ASSIGNMENT ASSIGNMENT GREEN BLUE DDCA DATA HSYNC VSYNC DDCA CLK Page: 2-3 ’ PA-3122 SERIES USER S MANUAL...
  • Page 15 Yellow Color Blinking LAN Message Active No LAN Message Active Left Side LED Green Color On 10/100Mbps LAN Speed Indicator Orange Color on Giga LAN Speed Indicator No LAN switch/ hub connected. Page: 2-4 ’ PA-3122 SERIES USER S MANUAL...
  • Page 16 Write "00"h to I/O port "588"h "588"h 2-1-7. USB Ports USB0, USB1, USB2, USB3, USB4: USB Type A Ports USB0~3: Rear I/O USB4: Side IO ASSIGNMENT ASSIGNMENT +5V (Max. current: 0.5A) USB0/ USB1/ USB2/ USB4/ USB3 Page: 2-5 ’ PA-3122 SERIES USER S MANUAL...
  • Page 17 Chapter 2 System Configuration 2-1-8. Printer Port (Optional) LPT: Printer Port, D-Sub 25-pin, co-lay with LPT1 ASSIGNMENT ASSIGNMENT STBJ ALFJ PDR0 ERRJ PDR1 PARR_INITJ PDR2 SLCTINJ PDR3 PDR4 PDR5 PDR6 PDR7 ACKJ BUSY SLCTJ Page: 2-6 ’ PA-3122 SERIES USER S MANUAL...

  • Page 18: Mainboard Component Locations & Jumper Settings

    Quad-Core JPWR_4P1 DIMM1 SATA2 JPWR_4P2 TOUCH3 USB6 JI_BUTTON1 Battery JP19 JP_VDD1 SPK1 JP32 SLOT1 JP15 SW1_3 JP14 JINV4 USB1 16 18 15 17 USB7 J3 JINVDRV1 LVDS1 COM4_2 PB-6822 Mainboard Component Locations Page: 2-7 ’ PA-3122 SERIES USER S MANUAL...
  • Page 19 Chapter 2 System Configuration SLOT2 PB-6822 Mainboard Component Locations - Rear Page: 2-8 ’ PA-3122 SERIES USER S MANUAL...
  • Page 20 PIN1 & PIN2 to create one setting and shorting. You can either connect PIN2 & PIN3 to create another setting. The same jumper diagrams are applied all through this manual. The figure below shows what the manual diagrams look and what they represent. Page: 2-9 ’ PA-3122 SERIES USER S MANUAL...
  • Page 21 Chapter 2 System Configuration Jumper diagrams Jumper settings Page: 2-10 ’ PA-3122 SERIES USER S MANUAL...
  • Page 22 2. There is no pin connection for JP_COM2 or JP_COM3 by default. Refer to Voltage Adjust Configuration in chapter 3 for detailed BIOS setting (BIOS default at Disabled). 3. Voltage of COM1 or COM4 is not adjustable on BIOS. Page: 2-11 ’ PA-3122 SERIES USER S MANUAL...
  • Page 23 JP20, JP21, JP22: COM3 / i-Button Function Connectors SELECTION JUMPER SETTING JUMPER ILLUSTRATION COM 3 JP20/JP21/JP22/ i-Button* JP20/JP21/JP22/ Note: Manufacturing Default is COM3. *COM3 & COM3-1 will not function when jumpers JP20, JP21 & JP22 are set as “i-Button.” Page: 2-12 ’ PA-3122 SERIES USER S MANUAL...
  • Page 24 Chapter 2 System Configuration 2-2-6. Cash Drawer Control Selection JP37: Cash Drawer control connector SELECTION JUMPER SETTING JUMPER ILLUSTRATION Cash Drawer Open JP37 JP37 Note: Manufacturing Default is GND. Page: 2-13 ’ PA-3122 SERIES USER S MANUAL...
  • Page 25 That is, JP29 will be enabled if DRW1 is disabled on BIOS. 2. There is no pin connection for JP29 by default. Refer to Voltage Adjust Configuration in chapter 3 for detailed BIOS setting (BIOS default at 12V). Page: 2-14 ’ PA-3122 SERIES USER S MANUAL...
  • Page 26 5V (Maximum current: 0.5A) USB1/ USB2/ USB7/ Note: USB1 would be used when jumpers JP14 & JP15 are set as 1-2 (short) connected. USB6 2-2-9. LED Connector LED1-1: Power indication LED connector ASSIGNMENT PWR_LED LED1-1 Page: 2-15 ’ PA-3122 SERIES USER S MANUAL...
  • Page 27 DC5V_PWR1: DC 5Voltage Provider Connector ASSIGNMENT DC5V_PWR1 2-2-11. Power for Thermal Printer Connector PRT_PWR1: Power for Thermal Printer Connector ASSIGNMENT VCC24SB PRT_PWR1 VCC24SB 2-2-12. External Speaker Connector SPK1: External speaker connector ASSIGNMENT SPK_GND SPK1 SPK_OUT Page: 2-16 ’ PA-3122 SERIES USER S MANUAL...
  • Page 28 2-2-14. LED Backlight Power Control Selection JP12: LED backlight power control connectors (for LED backlight panel without power driver built-in) SELECTION JUMPER SETTING JUMPER ILLUSTRATION JP12 JP12 Note: Manufacturing Default is LED. Page: 2-17 ’ PA-3122 SERIES USER S MANUAL...
  • Page 29 (24 bit) 10.4” JP8: 3-5, 2-4 1024 x 768 JP9:3-5, 4-6 (18 bit) 10.4” JP8: 3-5, 4-6 800 x 600 JP9: 3-5, 4-6 (18bit) Note: Manufacturing Default is 10.4”, 1024 x 768 (18bit). Page: 2-18 ’ PA-3122 SERIES USER S MANUAL...
  • Page 30 LVDS_A0_D- LVDS_B3_D- LVDS_A3_D+ LVDS_B0_D+ LVDS_A3_D- LVDS_B0_D- LVDS_VCC LVDS_VCC 2-2-18. Touch Panel Connector TOUCH3: Touch panel connectors ASSIGNMENT ASSIGNMENT LR (Low Right) UR (Up Right) LL (Low Left) UL (Up Left) Probe TOUCH3 Page: 2-19 ’ PA-3122 SERIES USER S MANUAL...
  • Page 31 Note: 1. Manufacturing Default is USB. 2. The COM2 & COM2-1 connector will not function when JP38 & JP39 are set as 1-2 connected. 3. USB1 connector when JP14 & JP15 are set as 1-2 connected. Page: 2-20 ’ PA-3122 SERIES USER S MANUAL...
  • Page 32 After five to six seconds, set the jumper back to “Normal” and power-on the computer. 2-2-21. MSR/Card Reader Connector PS/2_2: MSR/Card reader connectors ASSIGNMENT KB_CLK (Output) KB_CLK_C (Input) KB_DATA_C (Input) KB_DATA (Output) PS/2_2 Page: 2-21 ’ PA-3122 SERIES USER S MANUAL...
  • Page 33 SATA1/ SATA2/ Note: SATA1 only supports the optional RAID function on board. JPWR_4P1, JPWR_4P2: Serial ATA power connectors ASSIGNMENT JPWR_4P1/ JPWR_4P2/ VCC12 Note: JPWR_4P1 only supports the optional RAID function on board. Page: 2-22 ’ PA-3122 SERIES USER S MANUAL...
  • Page 34 Chapter 2 System Configuration 2-2-23. Printer Connector LPT1 LPT1: Printer connector ASSIGNMENT ASSIGNMENT STBJ ALFJ PDR0 ERRJ PDR1 PAR_INITJ PDR2 SLCTINJ PDR3 PDR4 PDR5 PDR6 PDR7 ACKJ BUSY SLCTJ Page: 2-23 ’ PA-3122 SERIES USER S MANUAL...
  • Page 35 +1.5V SLOT1 Reserved SMB_CLK Reserved PETn2 +1.5V SMB_DATA CLKREQ# PETp2 Reserved Reserved REFCLK1- Reserved REFCLK1+ +3.3V Reserved +3.3V Reserved Reserved Reserved Reserved Reserved Reserved Reserved PERST# +1.5V PERn2 +3.3SB PERp2 Reserved +3.3V Page: 2-24 ’ PA-3122 SERIES USER S MANUAL...
  • Page 36 SMB_CLK Reserved PETn0/SATA1_TX- +1.5V SMB_DATA CLKREQ# PETp0/SATA1_TX+ Reserved SLOT2 Reserved USB_D- REFCLK0- Reserved USB_D+ REFCLK0+ +3.3V Reserved +3.3V Reserved Reserved Reserved Reserved Reserved Reserved Reserved PERST# +1.5V PERn0/SATA1_RX+ +3.3SB PERp0/SATA1_RX- Reserved +3.3V Page: 2-25 ’ PA-3122 SERIES USER S MANUAL...

  • Page 37: Printer Board Component Locations & Pin Assignment

    Chapter 2 System Configuration 2-3. PRINTER BOARD COMPONENT LOCATIONS & PIN ASSIGNMENT 2-3-1. Printer Board: PDAC-3100 PDAC-3100 Printer Board Component Locations Page: 2-26 ’ PA-3122 SERIES USER S MANUAL...
  • Page 38 Chapter 2 System Configuration 2-3-1-1. Power Supply Connector CN1: Power supply wafer ASSIGNMENT +24V +24V 2-3-1-2. RS-232 Interface Connector CN7: RS-232 interface connector ASSIGNMENT ASSIGNMENT Page: 2-27 ’ PA-3122 SERIES USER S MANUAL...
  • Page 39 Auto-cutter motor drive signal 1B-1 Auto-cutter motor drive signal 1B-2 Auto-cutter motor drive signal 1A-1 Auto-cutter motor drive signal 1A-2 Auto-cutter motor drive signal 2-3-1-4. USB Connector CN8: USB Connector ASSIGNMENT ASSIGNMENT Vbus Page: 2-28 ’ PA-3122 SERIES USER S MANUAL...
  • Page 40 DST3 Head strobe signal 3.3V Logic Power Thermistor GND Thermistor GND Thermistor signal Unused DST2 Head strobe signal DST1 Head strobe signal Head GND Head GND Head GND Head GND Head GND Page: 2-29 ’ PA-3122 SERIES USER S MANUAL...
  • Page 41 GND of the platen position/ out-of-paper sensor Signal of the platen position sensor Unused Frame GND Frame GND Unused Motor drive signal Motor drive signal Motor drive signal Motor drive signal Page: 2-30 ’ PA-3122 SERIES USER S MANUAL...
  • Page 42 Reset signal Status signal Status signal Status signal Status signal Drawer sensor signal Drawer switch signal Drive terminal for the drawer (Vp side) GNDdu Drive terminal for the drawer (GND side) Unused Page: 2-31 ’ PA-3122 SERIES USER S MANUAL...
  • Page 43 Chapter 2 System Configuration 2-3-2. Printer Board: MB-1030 CUT_CN1 COM1 9 10 USB_CN1 24V_CN1 PRINT_CN1 MB-1030 Printer Board Component Locations Page: 2-32 ’ PA-3122 SERIES USER S MANUAL...
  • Page 44 Chapter 2 System Configuration 2-3-2-1. Power Supply Connector 24V_CN1: Power Supply Wafer ASSIGNMENT +24V +24V 24V_CN1 2-3-2-2. RS-232 Interface Connector COM1: RS-232 Interface Connector ASSIGNMENT ASSIGNMENT DSR /CTS 9 10 DTR /RTS COM1 Page: 2-33 ’ PA-3122 SERIES USER S MANUAL...
  • Page 45 DST3 Head strobe signal 3.3V Logic Power Thermistor GND Thermistor GND Thermistor signal Unused DST2 Head strobe signal DST1 Head strobe signal Head GND Head GND Head GND Head GND Head GND Page: 2-34 ’ PA-3122 SERIES USER S MANUAL...
  • Page 46 GND of the platen position/ out-of-paper sensor Signal of the platen position sensor Unused Frame GND Frame GND Unused Motor drive signal Motor drive signal Motor drive signal Motor drive signal Page: 2-35 ’ PA-3122 SERIES USER S MANUAL...
  • Page 47 Autocutter motor drive signal 2-3-2-5. Paper-Near-END Sensor Connector CN2: Paper-near-end sensor connector ASSIGNMENT FUNCTION Power supply of the near end sensor Signal of the near end sensor GND of the near end sensor Page: 2-36 ’ PA-3122 SERIES USER S MANUAL...
  • Page 48 Reset signal Status signal Status signal Status signal Status signal Drawer sensor signal Drawer switch signal Drive terminal for the drawer (Vp side) GNDdu Drive terminal for the drawer (GND side) Unused Page: 2-37 ’ PA-3122 SERIES USER S MANUAL...
  • Page 49 Chapter 2 System Configuration 2-3-3. Printer Board: MB-1011 & MB-1013 MB-1013 MB-1011 MB-1011 & MB-1013 Printer Board Component Locations Page: 2-38 ’ PA-3122 SERIES USER S MANUAL...
  • Page 50 Chapter 2 System Configuration 2-3-3-1. Power Supply Connector CN1: Power supply wafer ASSIGNMENT +24V +24V 2-3-3-2. RS-232 Interface Connector CN7: RS-232 interface connector ASSIGNMENT ASSIGNMENT Page: 2-39 ’ PA-3122 SERIES USER S MANUAL...
  • Page 51 DST3 Head strobe signal 3.3V Logic Power Thermistor GND Thermistor GND Thermistor signal Unused DST2 Head strobe signal DST1 Head strobe signal Head GND Head GND Head GND Head GND Head GND Page: 2-40 ’ PA-3122 SERIES USER S MANUAL...
  • Page 52 GND of the platen position/ out-of-paper sensor Signal of the platen position sensor Unused Frame GND Frame GND Unused Motor drive signal Motor drive signal Motor drive signal Motor drive signal Page: 2-41 ’ PA-3122 SERIES USER S MANUAL...
  • Page 53 Autocutter motor drive signal 1B-1 Autocutter motor drive signal 1B-2 Autocutter motor drive signal 1A-1 Autocutter motor drive signal 1A-2 Autocutter motor drive signal 2-3-3-5. USB Interface Connector CN8: USB interface connector ASSIGNMENT Vbus Page: 2-42 ’ PA-3122 SERIES USER S MANUAL...
  • Page 54 Reset signal Status signal Status signal Status signal Status signal Drawer sensor signal Drawer switch signal Drive terminal for the drawer (Vp side) GNDdu Drive terminal for the drawer (GND side) Unused Page: 2-43 ’ PA-3122 SERIES USER S MANUAL...

  • Page 55: Vfd Board Component Locations & Pin Assignment

    Chapter 2 System Configuration 2-4. VFD BOARD COMPONENT LOCATIONS & PIN ASSIGNMENT 2-4-1. VFD Board: MB-4103, LD720 JP12V MB-4103 & LD720 VFD Board Component Locations Page: 2-44 ’ PA-3122 SERIES USER S MANUAL...
  • Page 56 2-4-1-1. Power Switch Selection JP12V: Power Switch Selection SELECTION JUMPER SETTING JUMPER ILLUSTRATION JP12V JP12V Note: Manufacturing Default is ON. 2-4-1-2. RS-232 Serial Interface Connector CN1: RS-232 serial interface wafer ASSIGNMENT ASSIGNMENT +12V/+5V Page: 2-45 ’ PA-3122 SERIES USER S MANUAL...

  • Page 57: Msr Board Component Locations & Pin Assignment

    2-5. MSR BOARD COMPONENT LOCATIONS & PIN ASSIGN- MENT 2-5-1. ID TECH ID-TECH MSR Board Component Locations 2-5-1-1. Main Connector ASSIGNMENT ASSIGNMENT Chassis Ground K-CLK (Computer connections) P-CLK K-DATA (Keyboard connections) (Computer connections) P-DATA (Keyboard connections) +5V Vcc Page: 2-46 ’ PA-3122 SERIES USER S MANUAL...
  • Page 58 SYSKING MSR Board Component Locations 2-5-2-1. Main Connector ASSIGNMENT ASSIGNMENT +5V Vcc K-DATA (Host to MSR) K-CLK Host to MSR P-DATA (MSR to Keyboard) P-CLK Signal Ground (MSR to Keyboard) Signal Ground Page: 2-47 ’ PA-3122 SERIES USER S MANUAL...
  • Page 59 MB-3012 MSR Board Component Locations 2-5-3-1. Information Button Reader I_BUTTON1: Information button reader ASSIGNMENT I_B1 I-BUTTON1 2-5-3-2. Output Connector IO1: Output wafer ASSIGNMENT ASSIGNMENT CLK_KB RX_MSR CLK_PC TX_MSR DATA_KB DATA_PC USB_D+_R USB_D-_R CHASSIS GND Page: 2-48 ’ PA-3122 SERIES USER S MANUAL...

  • Page 60: Chapter 3 Software

    CHAPTER SOFTWARE This chapter provides the detailed information of driver utilities and BIOS settings for the system. Sections included: Driver ® - Intel Chipset Software Installation Utility - VGA Driver Utility - LAN Driver Utility - Sound Driver Utility - Touchsreen Driver Utility - Fingerprinter Driver Utility (Optional) - RFID Module Driver (Optional) - Wireless Module Driver (Optional)

  • Page 61: Driver

    Chapter 3 Software 3-1. DRIVER 3-1-1. Introduction Enclosed with the PA-3122 Series package is our driver utilities, which comes in a CD-ROM format. Refer to the following table for driver locations. FILENAME PURPOSE (Assume that CD ROM drive is D:) ®...
  • Page 62 OS installation. Please follow the steps below: Connect the USB CD-ROM device to PA-3122 and insert the driver disk. Enter the “Main Chip” folder where the Chipset driver is located (depending on your OS platform).
  • Page 63 Chapter 3 Software 3-1-3. VGA Driver Utility The VGA interface embedded with PA-3122 can support a wide range of display types. You can have dual displays via CRT & LVDS interfaces work simultaneously. 3-1-3-1. Installation of VGA Driver To install the Graphics driver, follow the steps below: Connect the USB-CD ROM device to PA-3122 and insert the driver disk.
  • Page 64 OS platform). Click Setup.exe file for driver installation. Follow the on-screen instructions to complete the installation. Once installation is completed, shut down the system and restart PA-3122 for the changes to take effect. 3-1-6. Touchscreen Driver Utility The touchscreen driver utility can only be installed on Windows POSReady 7 &...
  • Page 65 Click Setup.exe file for driver installation. Follow the on-screen instructions to complete the installation. Once installation is completed, shut down the system and restart PA-3122 for the changes to take effect. 3-1-8. RFID Module Driver Utility (Optional) The RFID driver utility can only be installed on Windows POSReady7 &...
  • Page 66 Enter the “Device\Embedded Wireless Module” folder where the wireless driver is located. Click Setup.exe file for driver installation. Follow the on-screen instructions to complete the installation. Once installation is completed, shut down the system and restart PA-3122 for the changes to take effect. ′ Page:3-7...

  • Page 67: Embedded Peripheral Devices

    POS Printer Service Object and Method Relations Method Status of support Notes Open ○ Close ○ ClaimDevice ○ ReleaseDevice ○ Enable ○ Disable ○ CheckHealth ○ PrintNormal ○ PrintBarCode ○ PrintBitmap ○ RotatePrint only support 180° ○ CutPaper ○ ′ Page:3-8 PA-3122 SERIES USER S MANUAL...
  • Page 68 Follow the wizard instructions to complete the installation. Launching Program Below steps guide you to load the MB1030 program. Click POSPrinter folder from the path Start\Programs\Protech OPOS. Click MB1030 to launch the program. ′ Page:3-9 PA-3122 SERIES USER S MANUAL...
  • Page 69 OPOS Control Object of MB1030 Program a.) Print tab buttons: Button/Item Description Printer Normal Print the string. b.) Bitmap tab buttons/items: Button/Item Description Load Load bitmap file. Print Bitmap Print bitmap file. Type Normal or Rotate 108˚. ′ Page:3-10 PA-3122 SERIES USER S MANUAL...
  • Page 70 Default Value Note BaudRate String 115200 UART Baud Rate (default) BitLength String UART Data Bit (default) Parity String UART Parity Bit (default) Port String COM4 UART Port (default) Stop String UART Stop Bit (default) ′ Page:3-11 PA-3122 SERIES USER S MANUAL...
  • Page 71 Not Applicable Properties specific bool CapTransaction Read only Not Applicable Properties specific bool CapJrnPresent Read only Not Applicable Properties specific bool CapJrn2Color Read only Not Applicable Properties specific bool CapJrnBold Read only Not Applicable ′ Page:3-12 PA-3122 SERIES USER S MANUAL...
  • Page 72 Not Applicable Properties specific bool CapSlpBarCode Read only Not Applicable Properties specific bool CapSlpBitmap Read only Not Applicable Properties specific bool CapSlpBold Read only Not Applicable Properties specific bool CapSlpBothSidesPrint Read only Not Applicable ′ Page:3-13 PA-3122 SERIES USER S MANUAL...
  • Page 73 JrnNearEnd Read only Not Applicable Properties specific long JrnCartridgeState Read only Not Applicable Properties specific long JrnCurrentCartridge Not Applicable Properties specific long RecLineChars Not Applicable Properties specific string RecLineCharsList Read only Not Applicable ′ Page:3-14 PA-3122 SERIES USER S MANUAL...
  • Page 74 Methods common Open Supported Methods common Close Supported Methods common Claim Supported Methods common ClaimDevice Supported Methods common Release Supported Methods common ReleaseDevice Supported Methods common CheckHealth Supported Methods common ClearInput Not Applicable ′ Page:3-15 PA-3122 SERIES USER S MANUAL...
  • Page 75 Not Applicable Methods specific MarkFeed Not Applicable Events common DataEvent Not Applicable Events common DirectIOEvent Not Applicable Events common ErrorEvent Not Applicable Events common OutputComplete Not Applicable Event Events common StatusUpdate Not Applicable Event ′ Page:3-16 PA-3122 SERIES USER S MANUAL...
  • Page 76 Port COM1 Stop OPOS VFD Service Object and Method Relations Method Status of support Notes Open ○ Close ○ ClaimDevice ○ ReleaseDevice ○ Enable ○ Disable ○ DisplayText ○ DisplayTextAt ○ ClearText ○ ′ Page:3-17 PA-3122 SERIES USER S MANUAL...
  • Page 77 Follow the wizard instructions to complete the installation. Launching Program Below steps guide you to load the Prox-PMP4000 program. Click LineDisplay folder from the path Start/Programs/Protech OPOS. Click Prox-PMP4000 to launch the program. ′ Page:3-18 PA-3122 SERIES USER S MANUAL...
  • Page 78 Default Value Note BaudRate String 9600 UART Baud Rate (default) BitLength String UART Data Bit (default) Parity String UART Parity Bit (default) Port String COM1 UART Port (default) Stop String UART Stop Bit (default) ′ Page:3-19 PA-3122 SERIES USER S MANUAL...
  • Page 79 Not Applicable Properties specific long CapCursorType Read only Not Applicable Properties specific bool CapCustomGlyph Read only Not Applicable Properties specific bool CapDescriptors Read only Not Applicable Properties specific bool CapHMarquee Read only Not Applicable ′ Page:3-20 PA-3122 SERIES USER S MANUAL...
  • Page 80 Close Supported Methods common Claim Supported Methods common ClaimDevice Supported Methods common Release Supported Methods common ReleaseDevice Supported Methods common CheckHealth Not Applicable Methods common ClearInput Not Applicable Methods common ClearOutput Not Applicable ′ Page:3-21 PA-3122 SERIES USER S MANUAL...
  • Page 81 Not Applicable Methods specific DefineGlyph Not Applicable Events common DataEvent Not Applicable Events common DirectIOEvent Not Applicable Events common ErrorEvent Not Applicable Events common OutputComplete Not Applicable Event Events common StatusUpdate Not Applicable Event ′ Page:3-22 PA-3122 SERIES USER S MANUAL...
  • Page 82 This setup also installs the Prox-PMP3000 program. Follow the wizard instructions to complete the installation. Launching Program Below steps guide you load the Prox-PMP3000 program. Click MSR folder from the path Start/Programs/Protech OPOS. Click Prox-PMP3000 to launch the program. ′ Page:3-23 PA-3122 SERIES USER S MANUAL...
  • Page 83 Configuration of Prox-PMP3000 program a.) Main screen & Control tab items: Button/Item Description (dropdown list) To set COM port number (only for USRT/USB interface). AutoDisable (check box) Set auto-disable FreeseEvents (check box) Set freeze events ′ Page:3-24 PA-3122 SERIES USER S MANUAL...
  • Page 84 ParseDecodeData Set parse decode data properties TransmitSentinels Set transmit-sentinels properties ErrorReporting Type Card, track TracksToRead Track1, track2, track3, tracks12, tracks13, tracks14, tracks23, tracks24, tracks34, tracks123, tracks124, tracks134, tracks234, tracks1234 (Tracks4 is not applicable). ′ Page:3-25 PA-3122 SERIES USER S MANUAL...
  • Page 85 Chapter 3 Software d.) Track Data tab items Button/Item Description TracksData (Row) Display data of all tracks (Track4 is not applicable). e.) Parsed Data tab items Button/Item Description Parsed Data Display special properties. ′ Page:3-26 PA-3122 SERIES USER S MANUAL...
  • Page 86 Properties common string DeviceName Read only Supported Properties specific bool CapISO Read only Supported Properties specific bool CapJISOne Read only Supported Properties specific bool CapJISTwo Read only Supported Properties specific bool CapTransmitSentinels Read only Supported ′ Page:3-27 PA-3122 SERIES USER S MANUAL...
  • Page 87 ClearOutput Not Applicable Methods common DirectIO Not Applicable Events common DataEvent Supported Events common DirectIOEvent Not Applicable Events common ErrorEvent Not Applicable Events common OutputCompleteEvent Not Applicable Events common StatusUpdateEvent Not Applicable ′ Page:3-28 PA-3122 SERIES USER S MANUAL...
  • Page 88 Devive Name for CO open FileName (NULL) (reserved) HardwareProvider (reserved) Model MJR243 Device model name Parity None Parity for the communication port Port COM4 Comport Protocol Hardware Communication Control Baudrate 19200 RS232 baudrate ′ Page:3-29 PA-3122 SERIES USER S MANUAL...
  • Page 89 ○ DeviceName Read only ○ CapISO Read only ○ CapTransmitSentinels Read only ○ AccountNumber Read only ○ DecodeData ○ ExpirationDate Read only ○ FirstName Read only ○ MiddleInitial Read Only ○ ParseDecodeData ○ ′ Page:3-30 PA-3122 SERIES USER S MANUAL...
  • Page 90 ○ Surname Read Only ○ Title Read Only ○ Track1Data Read Only ○ Track1DiscretionaryData Read Only ○ Track2Data Read Only ○ Track2DiscretionaryData Read Only ○ Track3Data Read Only ○ TracksToRead ○ TransmitSentinels ○ ′ Page:3-31 PA-3122 SERIES USER S MANUAL...
  • Page 91 Follow the wizard instructions to complete the installation. Launching Program Below steps guide you to load the OPOS MSR Register program. Click OPOS folder from the path Start/Programs/GIGA‐TMS. Click OPOS MSR Register to launch the program. ′ Page:3-32 PA-3122 SERIES USER S MANUAL...
  • Page 92 Step 1: Select an item in Service Object List box (left pane). Make sure the correct item is selected. Step 2: Click Reg button Step 3: In the OPOS MSR Setting screen, enter the device name and click OK. ′ Page:3-33 PA-3122 SERIES USER S MANUAL...
  • Page 93 Chapter 3 Software c.) Example 1. MAGTEK USB HID d.) Example 2. PROMAG MSR/MJR PART NO, Keyboard mode. ‐ ′ Page:3-34 PA-3122 SERIES USER S MANUAL...
  • Page 94 Transmit Sentinels Debug string Enable the tracing, and create a log file Description string GIGATMS Description for SO driver MSR POS DeviceName string MJR243 Devive Name for CO open FileName string (NULL) (reserved) ′ Page:3-35 PA-3122 SERIES USER S MANUAL...
  • Page 95 Properties common long ResultCodeExtended Read only Supported Properties common long State Read only Supported Properties common ControlObject Read only Supported string Description Properties common long ControlObjectVersion Read only Supported Properties common ServiceObject Read only Supported ′ Page:3-36 PA-3122 SERIES USER S MANUAL...
  • Page 96 Properties specific Track2Data Read only Supported binary Properties specific Track2 Supported binary DiscretionaryData Properties specific Track3Data Read only Supported binary Properties specific Track4Data Read only Not Applicable binary Properties specific long TracksToRead Supported ′ Page:3-37 PA-3122 SERIES USER S MANUAL...
  • Page 97 UpdateFirmware Not Applicable Methods common UpdateStatistics Not Applicable Events common DataEvent Supported Events common DirectIOEvent Not Applicable Events common ErrorEvent Not Applicable Events common OutputCompleteEvent Not Applicable Events common StatusUpdateEvent Not Applicable ′ Page:3-38 PA-3122 SERIES USER S MANUAL...
  • Page 98 Register program. Launching Program Below steps guide you to load the OPOS MSR Tester program. Click OPOS folder from the path Start\Programs\GIGA ‐ T MS. Click OPOS MSR Tester to launch the program. ′ Page:3-39 PA-3122 SERIES USER S MANUAL...
  • Page 99 To start using OPOS driver to get track data, follow the steps below. Step 1: Entering the Device Name. Step 2: Clicking Open button. Step 3: Swiping card to get track data. ′ Page:3-40 PA-3122 SERIES USER S MANUAL...
  • Page 100 Chapter 3 Software c.) Example 1. MAGTEK USB HID. d.) Example 2. PROMAG MSR/MJR PART NO, Keyboard mode ‐ ′ Page:3-41 PA-3122 SERIES USER S MANUAL...
  • Page 101 Chapter 3 Software e.) Example 3. PROMAG MSR PART NO, HID mode ‐ ′ Page:3-42 PA-3122 SERIES USER S MANUAL...

  • Page 102: Api

    Contents / File Name Description DEMO DEMO PROJECT\GPIO Sample C# VB6 VB.net Source Code PROJECT\ Code DEMO PROJECT\Digital C# VB6 VB.net Source Code Sample Code DEMO PROJECT\Watchdog C# VB6 VB.net MFC Source Sample Code Code ′ Page:3-43 PA-3122 SERIES USER S MANUAL...
  • Page 103 Private Sub Timer1_Tick (ByVal Sender As System.Object,ByVal e As System.EventArgs) Handles Timer1.Tick Dim Receive_Status1 as Boolean Dim Receive_Status2 as Boolean Receive_Status1 = CashDrawerOpen(&H1) If Receive_Status1 = true then Text1.text = “cash drawer1 open” ‘enter text into textbox. Else ′ Page:3-44 PA-3122 SERIES USER S MANUAL...
  • Page 104 ‘========================================= Receive_Status2 = CashDrawerOpen(&H2) If Receive_Status2 = true then Text2.text = “cash drawer2 open” ‘enter text into textbox. Else Text2.text = “cash drawer2 close” ‘enter text into textbox. End if ‘========================================= End sub ′ Page:3-45 PA-3122 SERIES USER S MANUAL...
  • Page 105 Open cash drawer: CashDrawerOpen(1) Open cash drawer1 CashDrawerOpen(2) Open cash drawer2 Check cash drawer status: Dim receive_status as Boolean Check cash drawer1 status Receive_Status = CashDrawerOpen(&H1) Check cash drawer2 status Receive_Status = CashDrawerOpen(&H2) ′ Page:3-46 PA-3122 SERIES USER S MANUAL...
  • Page 106 Open cash drawer1 PortAccess.CashDrawerOpen(0x01); //check cash drawer1 status Open cash drawer2 PortAccess.CashDrawerOpen(0x02); //check cash drawer2 status Bool bstatus; bstatus = PortAccess.GetCashDrawerStatus(0x01); bstatus = PortAccess.GetCashDrawerStatus(0x02); //Before get cash drawer status, need to initial cash drawer first ′ Page:3-47 PA-3122 SERIES USER S MANUAL...
  • Page 107 As Boolean VB 6 extern function: Declare Function CashDrawerOpen Lib "CashDrawer.dll" (ByVal num_drawer As Integer) As Boolean Declare Function GetCashDrawerStatus Lib "CashDrawer.dll" (ByVal num_drawer As Integer) As Boolean Note: VB.net short = integer VB6 ′ Page:3-48 PA-3122 SERIES USER S MANUAL...
  • Page 108 Button/Item Description OPEN (button) Tap to open the cash drawer. Cash Drawer Status Cash drawer status will be displayed after OPEN is tapped. Drawer is closed as shown: Drawer is open as shown: ′ Page:3-49 PA-3122 SERIES USER S MANUAL...
  • Page 109 START: (button) Tap to start the watchdog timer. Meanwhile the REFRESH and STOP buttons will be enabled. REFRESH: (button) Tap to restart the watchdog timer. STOP: (button) Tap to stop the watchdog timer. ′ Page:3-50 PA-3122 SERIES USER S MANUAL...
  • Page 110 Chapter 3 Software 3-3-6. Hardware Monitor (Preview) Button/Item Description Monitor (button) Tap to get the hardware monitoring values, such as the voltages, temperatures, and fan speeds (rpm). ′ Page:3-51 PA-3122 SERIES USER S MANUAL...
  • Page 111 API Package. Refer to the main API functions listed as below. API Function Cash Drawer CashDrawerOpen multilangXML.dll CashDrawer.dll GetCashDrawerStatus Watchdog Watchdog_Set WatchDog.dll (WD) Watchdog_Stop Watchdog_SetMinSec Hardware HMWVoltage_Get Hardware Monitor Montior.dll HWMtTemperature_Get HWMFanSpeed_Get ′ Page:3-52 PA-3122 SERIES USER S MANUAL...
  • Page 112 True (1) on success, False (0) on failure Example: Short data; data= GetCashDrawerStatus(0x01); // Get the Cash Drawer1 status if (data) MsgBox(“open1”); // Cash Drawer1 status “Open” Else MsgBox(“close1”); // Cash Drawer1 status “Close” Endif ′ Page:3-53 PA-3122 SERIES USER S MANUAL...
  • Page 113 Stop the watchdog timer. Value: None Return: True (1) on success, False (0) on failure Watchdog_Recount bool Watchdog_Recount (void) Purpose: Restart the watchdog timer. Value: None Return: True (1) on success, False (0) on failure ′ Page:3-54 PA-3122 SERIES USER S MANUAL...
  • Page 114 Float type data on voltage value HMWTemperature_Get float HMWTemperature_Get (short TempType) Purpose: Get the hardware monitoring temperature value. Value: TempType 81866 0x01 CPU temperature 0x02 System temperature 0x03 Return: Float type data on temperature value ′ Page:3-55 PA-3122 SERIES USER S MANUAL...

  • Page 115: Bios Operation

    3-4. BIOS Operation 3-4-1. Introduction The board PA-3122 uses an AMI Aptio BIOS that is stored in the Serial Peripheral Interface Flash Memory (SPI Flash) and can be updated. The SPI Flash contains the BIOS Setup program, Power-on Self-Test (POST), the PCI auto-configuration utility, LAN EEPROM information, and Plug and Play support.
  • Page 116 The BIOS Setup program can be used to view and change the BIOS settings for the computer. The BIOS Setup program is accessed by pressing the <Del> or <ESC> key after the POST memory test begins and before the operating system boot begins. The settings are shown below. ′ Page:3-57 PA-3122 SERIES USER S MANUAL...
  • Page 117 Setup program. In a moment, the main menu of the Aptio Setup Utility will appear on the screen: ′ Page:3-58 PA-3122 SERIES USER S MANUAL...
  • Page 118 You may move the cursor by up/down keys to highlight the individual menu items. As you highlight each item, a brief description of the highlighted selection will appear at the bottom of the screen. ′ Page:3-59 PA-3122 SERIES USER S MANUAL...
  • Page 119 No changeable options Displays the date of current BIOS Time version. Sec RC No changeable options Displays the current Sec RC version. Version TXE FW No changeable options Displays the current TXE Version Version ′ Page:3-60 PA-3122 SERIES USER S MANUAL...
  • Page 120 Chapter 3 Software BIOS Setting Options Description/Purpose System English BIOS Setup language. Language System Date Month, day, year Specifies the current date. System Time Hour, minute, second Specifies the current time. ′ Page:3-61 PA-3122 SERIES USER S MANUAL...
  • Page 121 OS Selection Voltage/RI Adjust Sub-Menu Voltage/RI Adjust settings. Configuration CSM Configuration Sub-Menu Configure Option ROM execution, boot options filters, etc.. USB Configuration Sub-Menu USB Configuration Parameters. SIO Configuration Sub-Menu System Super IO Chip Configuration. ′ Page:3-62 PA-3122 SERIES USER S MANUAL...
  • Page 122 - S3 Only (Suspend to Suspend Disabled disables ACPI RAM) sleep feature. S3 allows the platform to enter suspend to RAM mode. Lock Legacy - Disabled Enables or Disables Lock of Legacy Resources. - Enabled Resources. ′ Page:3-63 PA-3122 SERIES USER S MANUAL...
  • Page 123 Displays voltage level of the +VSB5 in supply. VCC5 No changeable options Displays voltage level of the + VCC5 in supply. VCC12 No changeable options Displays voltage level of the + VCC12 in supply. ′ Page:3-64 PA-3122 SERIES USER S MANUAL...
  • Page 124 Enable/Disable Watch dog timer. WatchDog -Disable Watchdog Select seconds or minutes timer unit -60s Count for Multiple options Sets the desired value (seconds) for Timer ranging from 1 to 255 watchdog timer. (Seconds) ′ Page:3-65 PA-3122 SERIES USER S MANUAL...
  • Page 125 Choose the number of cores to be Processor enabled in current processor. Cores Limit CPUID - Disabled Enables for legacy operating systems to Maximum boot processors with extended CPUID - Enabled functions. Set disable for Win XP. ′ Page:3-66 PA-3122 SERIES USER S MANUAL...
  • Page 126 Chapter 3 Software BIOS Setting Options Description/Purpose Intel - Disabled When enabled, a VMM can utilize the Virtualization additional hardware capabilities - Enabled provided by Vanderpool Technology Technology (VT). ′ Page:3-67 PA-3122 SERIES USER S MANUAL...
  • Page 127 Technology Technology is supported by processor Intel VT-x No changeable options Reports if Intel VT-x Technology is Technology supported by processor. L1 Data Cache No changeable options Displays size of L1 Data Cache ′ Page:3-68 PA-3122 SERIES USER S MANUAL...
  • Page 128 Description/Purpose L1 Code Cache No changeable options Displays size of L1 Code Cache L2 Cache No changeable options Displays size of L2 Cache. L3 Cache No changeable options Displays size of L3 Cache. ′ Page:3-69 PA-3122 SERIES USER S MANUAL...
  • Page 129 SATA Mode - IDE mode Configures SATA as follows. - AHCI mode IDE: Set SATA operation mode to IDE mode. AHCI: SATA works as AHCI (Advanced Host Controller Interface) mode for getting better performance. ′ Page:3-70 PA-3122 SERIES USER S MANUAL...
  • Page 130 0. Shows [Empty] if no drive is installed. If mother board support RAID that will show ASMT109x- Conf (0.1GB) SATA Port 1 [drive] Displays the drive installed on this SATA port 1. Shows [Empty] if no drive is installed. ′ Page:3-71 PA-3122 SERIES USER S MANUAL...
  • Page 131 Chapter 3 Software 3-4-4-6. OS Selection OS Selection screen BIOS Setting Options Description/Purpose OS Selection - Windows 8.x Operation System Selection - Android - Windows7 ′ Page:3-72 PA-3122 SERIES USER S MANUAL...
  • Page 132 COM1 Select - Disabled Select COM1 Port voltage. - RI -12V COM2 Select - Disabled Select COM2 Port voltage. - RI -12V COM3 Select - Disabled Select COM3 Port voltage. - RI -12V ′ Page:3-73 PA-3122 SERIES USER S MANUAL...
  • Page 133 Chapter 3 Software BIOS Setting Options Description/Purpose COM4 Select - Disabled Select COM4 Port voltage. - RI -12V Cash drawer - Cash drawer 12V Select Cash drawer voltage. - Cash drawer 24V ′ Page:3-74 PA-3122 SERIES USER S MANUAL...
  • Page 134 Select Gate A20 operation mode. Active - Always Upon Request: GA20 can be disabled using BIOS services. Always: do not allow disabling GA20; this option is useful when any RT code is executed above 1MB. ′ Page:3-75 PA-3122 SERIES USER S MANUAL...
  • Page 135 - Legacy only - Legacy first - UEFI first Other PCI - UEFI first Select launch method for other PCI devices devices, such as NIC, mass storage or - Legacy only video card. ′ Page:3-76 PA-3122 SERIES USER S MANUAL...
  • Page 136 - Enabled EHCI Hand-of - Disabled This is a workaround for OSes without EHCI hand-off support. - Enabled USB Mass - Disabled Enable/Disable USB mass storage Storage Driver driver support. - Enabled Support ′ Page:3-77 PA-3122 SERIES USER S MANUAL...
  • Page 137 0 to 40 second increments seconds Mass Storage - Auto Display the device name and choose Devices: the device emulation type. - Floppy - Force FDD - Hard Disk - CD-ROM ′ Page:3-78 PA-3122 SERIES USER S MANUAL...
  • Page 138 Set Parameters for COM3 Serial Port 3 [*Active*] Sub-menu Set Parameters for COM4 Serial Port 4 [*Active*] Sub-menu Set Parameters for LPT port. Parallel Port [*Active*] PS2 Sub-menu Set Parameters for PS2. Controller (KB&MS) ′ Page:3-79 PA-3122 SERIES USER S MANUAL...
  • Page 139 2. Possible: -Use Automatic Settings Select IRQ and I/O resource -IO=3F8h; IRQ=4 DMA for the serial -IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12 DMA port 1. -IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12 DMA -IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12 DMA -IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12 DMA ′ Page:3-80 PA-3122 SERIES USER S MANUAL...
  • Page 140 2. Possible: -Use Automatic Settings Select IRQ and I/O resource -IO=2F8h; IRQ=3 DMA for the serial -IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12 DMA port 2 -IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12 DMA -IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12 DMA -IO=2E8h; IRQ=3,4,5,6,7,10,11,12 DMA ′ Page:3-81 PA-3122 SERIES USER S MANUAL...
  • Page 141 -Use Automatic Settings Select IRQ and -IO=3E8h; IRQ=7 DMA I/O resource for the serial -IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12 DMA port 3 -IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12 DMA -IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12 DMA -IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12 DMA -IO=2F0h; IRQ=3,4,5,6,7,9,10,11,12 DMA -IO=2E0h; IRQ=3,4,5,6,7,9,10,11,12 DMA ′ Page:3-82 PA-3122 SERIES USER S MANUAL...
  • Page 142 I/O resource for - IO=2E8h; IRQ=7 DMA the serial port 4 - IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12 DMA - IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12 DMA - IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12 DMA - IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12 DMA - IO=2F0h; IRQ=3,4,5,6,7,9,10,11,12 DMA - IO=2E0h; IRQ=3,4,5,6,7,9,10,11,12 DMA ′ Page:3-83 PA-3122 SERIES USER S MANUAL...
  • Page 143 Logical device No changeable options Displays current settings of setting the printer port. Possible: -Use Automatic Settings Select IRQ and I/O resource for the printer port. -IO=378h; IRQ=5 -IO=378h; IRQ=5,6,7,9,10,11,12 -IO=278h; IRQ=5,6,7,9,10,11,12 -IO=3BCh; IRQ=5,6,7,9,10,11,12 ′ Page:3-84 PA-3122 SERIES USER S MANUAL...
  • Page 144 -ECP and EPP 1.9 Mode EPP is Enhanced Parallel -ECP and EPP 1.7 Mode Port mode, a high-speed bi-directional mode for non-printer peripherals. ECP is Enhanced Capability Port mode, a high-speed bi-directional mode for printers and scanners. ′ Page:3-85 PA-3122 SERIES USER S MANUAL...
  • Page 145 Device -Enabled Logical device No changeable options Displays current settings of setting Current the printer port. Possible: - Use Automatic Settings Select IRQ and I/O resource for the printer port. -IO=60h; IO=60h; IRQ=1 ′ Page:3-86 PA-3122 SERIES USER S MANUAL...
  • Page 146 Chapter 3 Software 3-4-5. Chipset Chipset screen BIOS Setting Options Description/Purpose North Bridge Sub-menu Sets Parameter for (North Bridge) configuration. South Bridge Sub-menu Sets Parameter for (South Bridge) configuration. ′ Page:3-87 PA-3122 SERIES USER S MANUAL...
  • Page 147 North Bridge screen BIOS Setting Options Description/Purpose Intel IGD Sub-menu Configure Graphic Settings. Configuration Memory No changeable options Displays the DRAM information on Information platform. Total Memory No changeable options Displays the DRAM size ′ Page:3-88 PA-3122 SERIES USER S MANUAL...
  • Page 148 Primary Video Adaptor. Disable: Always disable IGD" IGD Turbo - Disabled Enable or disable IGD Turbo Enable - Enabled GFX Boost - Disabled Enable or disable GFX Boost accelerated graphics processing - Enabled ′ Page:3-89 PA-3122 SERIES USER S MANUAL...
  • Page 149 BIOS Setting Options Description/Purpose DVMT Pre- - 32M Select DVMT 5.0 Pre-Allocated Allocated (Fixed) Graphics Memory size used - 64M by the Internal Graphics Device. - 96M - 128M - 256M - 512M ′ Page:3-90 PA-3122 SERIES USER S MANUAL...
  • Page 150 BIOS Setting Options Description/Purpose Sub-menu Configure USB parameters. Configuration PCI Express Sub-menu Configure PCH PCIE parameters Configuration High Precision - Disabled Enable or disable the HPET (High Timer Precision Event Timer) - Enabled ′ Page:3-91 PA-3122 SERIES USER S MANUAL...
  • Page 151 - Last State till the power button is pressed. Power On makes system power on after restores AC power to the board. Last State brings system back to the last power state before AC remove. ′ Page:3-92 PA-3122 SERIES USER S MANUAL...
  • Page 152 Enabled or Disabled USB port 1 - Enabled USB Port 2 - Disabled Enabled or Disabled USB port 2 - Enabled USB Port 3 - Disabled Enabled or Disabled USB port 3 - Enabled ′ Page:3-93 PA-3122 SERIES USER S MANUAL...
  • Page 153 Port 2(For mini - Enabled PCI-E) speed - Auto Selection PCI Express port 2 Speed - Gen1 - Gen2 PCI Express - Disabled Enabled or Disabled PCI Express port 3 Port 3(For - Enabled RTL8111) ′ Page:3-94 PA-3122 SERIES USER S MANUAL...
  • Page 154 Chapter 3 Software BIOS Setting Options Description/Purpose Speed - Auto Selection PCI Express port 3 Speed - Gen1 - Gen2 ′ Page:3-95 PA-3122 SERIES USER S MANUAL...
  • Page 155 Options Description/Purpose Administrator Password can be 3-20 Specifies the administrator password. Password alphanumeric characters. User Password Password can be 3-20 Specifies the user password. alphanumeric characters. HDD Security Sub-menu Set HDD password. Configuration: ′ Page:3-96 PA-3122 SERIES USER S MANUAL...
  • Page 156 - Enabled Boot Option - [Drive(s)] Allows setting boot option listed in #1~#n Hard Drive BBS Priorities. - Disabled Hard Drive Sub-Menu Allow user to select boot order of BBS Priorities available drive(s) ′ Page:3-97 PA-3122 SERIES USER S MANUAL...
  • Page 157 Chapter 3 Software 3-4-7-1. Hard Drive BBS Priorities Hard drive BBS priorities screen BIOS Setting Options Description/Purpose Boot Option #1 - [Drive(s)] Change the boot order of available - #n drive(s). - Disabled ′ Page:3-98 PA-3122 SERIES USER S MANUAL...
  • Page 158 Resets without saving any changes Changes and made in BIOS settings. Reset Restore No changeable options Loads the optimized defaults for BIOS Defaults settings. Boot Override - [Drive(s)] Forces to boot from selected [drive(s)]. ′ Page:3-99 PA-3122 SERIES USER S MANUAL...

  • Page 159: Watchdog Timer Configuration

    To exit the Extended Function Mode, writing 0xAA to the EFER is required. Once the chip exits the Extended Function Mode, it is in the normal running mode and is ready to enter the configuration mode. ′ Page:3-100 PA-3122 SERIES USER S MANUAL...
  • Page 160 ;------ Enter to extended function mode -------------------------------------------------------- ;------ Select Logical Device 7 of watchdog timer -------------------------------------------- ;------ Enable Watch dog feature -------------------------------------------- 030h ;------ Enable Watch PME-------------------------------------------- 0FAh ;------ Set second as counting unit -------------------------------------------------------------- 0f5h ′ Page:3-101 PA-3122 SERIES USER S MANUAL...
  • Page 161 Chapter 3 Software ;------ Set timeout interval as 30seconds and start counting --------------------------------- 0f6h ;------ Exit the extended function mode -------------------------------------------------------- 0aah ′ Page:3-102 PA-3122 SERIES USER S MANUAL...

  • Page 162: Bios Update Instructions

    Select [Boot] menu as the picture shows below. Select [Hard Drive BBS Priorities], set the USB bootable device as the 1 boot device. Press <F4> key to save configuration and exit the BIOS setup menu. ′ Page:3-103 PA-3122 SERIES USER S MANUAL...
  • Page 163 The recommended options for BIOS ROM update consist of following parameters: program main BIOS image /B: program Boot Block /N: program NVRAM /X: don’t check ROM ID ′ Page:3-104 PA-3122 SERIES USER S MANUAL...
  • Page 164 You can restart the system and boot up with new BIOS now Update is complete after restart Verify during the following boot that BIOS version displayed at the initialization screen has changed. ′ Page:3-105 PA-3122 SERIES USER S MANUAL...
  • Page 165 Chapter 3 Software ′ Page:3-106 PA-3122 SERIES USER S MANUAL...

  • Page 166: System Resource Map

    N- and J-series AHCI - 0F23 Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System ′ Page:3-107 PA-3122 SERIES USER S MANUAL...
  • Page 167 Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System ′ Page:3-108 PA-3122 SERIES USER S MANUAL...
  • Page 168 Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System ′ Page:3-109 PA-3122 SERIES USER S MANUAL...
  • Page 169 Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System ′ Page:3-110 PA-3122 SERIES USER S MANUAL...
  • Page 170 Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System ′ Page:3-111 PA-3122 SERIES USER S MANUAL...
  • Page 171 Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System ′ Page:3-112 PA-3122 SERIES USER S MANUAL...
  • Page 172 Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System ′ Page:3-113 PA-3122 SERIES USER S MANUAL...
  • Page 173 Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System ′ Page:3-114 PA-3122 SERIES USER S MANUAL...
  • Page 174 Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System ′ Page:3-115 PA-3122 SERIES USER S MANUAL...
  • Page 175 Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System ′ Page:3-116 PA-3122 SERIES USER S MANUAL...
  • Page 176 Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System ′ Page:3-117 PA-3122 SERIES USER S MANUAL...
  • Page 177 Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System ′ Page:3-118 PA-3122 SERIES USER S MANUAL...
  • Page 178 USB 3.0 eXtensible Host Controller - 0100 (Microsoft) ® 4294967293 Intel Trusted Execution Engine Interface 4294967294 Realtek PCIe GBE Family Controller 3-7-2. DMA Channels Map TIMER CHANNEL ASSIGNMENT Channel 4 Direct memory access controller ′ Page:3-119 PA-3122 SERIES USER S MANUAL...
  • Page 179 PCI Express Root Complex 0x00000080-0x0000008F Motherboard resources 0x00000092-0x00000092 Motherboard resources 0x000000A0-0x000000A1 Programmable interrupt controller 0x000000A4-0x000000A5 Programmable interrupt controller 0x000000A8-0x000000A9 Programmable interrupt controller 0x000000AC-0x000000AD Programmable interrupt controller 0x000000B0-0x000000B1 Programmable interrupt controller 0x000000B2-0x000000B3 Motherboard resources ′ Page:3-120 PA-3122 SERIES USER S MANUAL...
  • Page 180 N- and J-series / Intel ® Celeron processor N- and J-series AHCI - 0F23 ® ® ® 0x0000F050-0x0000F057 Intel Pentium processor N- and J-series / Intel ® Celeron processor N- and J-series AHCI - 0F23 ′ Page:3-121 PA-3122 SERIES USER S MANUAL...
  • Page 181 N- and J-series AHCI - 0F23 ® ® ® 0x0000F070-0x0000F077 Intel Pentium processor N- and J-series / Intel ® Celeron processor N- and J-series AHCI - 0F23 ® 0x0000F080-0x0000F087 Intel HD Graphics ′ Page:3-122 PA-3122 SERIES USER S MANUAL...
  • Page 182 Intel Trusted Execution Engine Interface ® 0xD0400000-0xD04FFFFF Intel Trusted Execution Engine Interface ® ® ® 0xD0711000-0xD07117FF Intel Pentium processor N- and J-series / Intel ® Celeron processor N- and J-series AHCI - 0F23 ′ Page:3-123 PA-3122 SERIES USER S MANUAL...
  • Page 183 ® 0xE00000D0-0xE00000DB Intel Sideband Fabric Device ® 0xFF000000-0xFFFFFFFF Intel 82802 Firmware Hub Device 0xA0000-0xBFFFF PCI Express Root Complex ® 0xA0000-0xBFFFF Intel HD Graphics 0xC0000-0xDFFFF PCI Express Root Complex 0xE0000-0xFFFFF PCI Express Root Complex ′ Page:3-124 PA-3122 SERIES USER S MANUAL...

  • Page 184: Chapter 4 System Diagrams

    CHAPTER SYSTEM DIAGRAMS This chapter contains exploded diagrams and part numbers of the PA- 3122 system. Sections included: Exploded Diagram for System Top Case Exploded Diagram for System LCD Panel Exploded Diagram for System Bottom Case Exploded Diagram for MSR Exploded Diagram for VFD Exploded Diagram for Printer Exploded Diagram for HDD...

  • Page 185: Exploded Diagram For System Top Case

    Chapter 4 System Assembly EXPLODED DIAGRAM FOR SYSTEM TOP CASE Open the System Top Module ′ Page: 4-2 PA-3122 SERIES USER S MANUAL...
  • Page 186 Chapter 4 System Assembly Remove Cable x 4 Remove Cable x 3 2. Push 3. Remove as the  arrow indicates. 1. Rotate 45° ′ Page: 4-3 PA-3122 SERIES USER S MANUAL...
  • Page 187 Chapter 4 System Assembly With i-Button ′ Page: 4-4 PA-3122 SERIES USER S MANUAL...
  • Page 188 Chapter 4 System Assembly With Fingerprinter ′ Page: 4-5 PA-3122 SERIES USER S MANUAL...
  • Page 189 Chapter 4 System Assembly ′ Page: 4-6 PA-3122 SERIES USER S MANUAL...
  • Page 190 Chapter 4 System Assembly With MSR ′ Page: 4-7 PA-3122 SERIES USER S MANUAL...
  • Page 191 Chapter 4 System Assembly With MSR Without MSR ′ Page: 4-8 PA-3122 SERIES USER S MANUAL...

  • Page 192: Exploded Diagram For System Lcd Panel

    Chapter 4 System Assembly EXPLODED DIAGRAM FOR SYSTEM LCD PANEL Back side ′ Page: 4-9 PA-3122 SERIES USER S MANUAL...
  • Page 193 Chapter 4 System Assembly ′ Page: 4-10 PA-3122 SERIES USER S MANUAL...
  • Page 194 Chapter 4 System Assembly Back side ′ Page: 4-11 PA-3122 SERIES USER S MANUAL...
  • Page 195 Chapter 4 System Assembly ′ Page: 4-12 PA-3122 SERIES USER S MANUAL...

  • Page 196: Exploded Diagram For System Bottom Case

    Chapter 4 System Assembly EXPLODED DIAGRAM FOR SYSTEM BOTTOM CASE ′ Page: 4-13 PA-3122 SERIES USER S MANUAL...
  • Page 197 Chapter 4 System Assembly Printer Control Board Printer Box ′ Page: 4-14 PA-3122 SERIES USER S MANUAL...
  • Page 198 Chapter 4 System Assembly Push ′ Page: 4-15 PA-3122 SERIES USER S MANUAL...
  • Page 199 Chapter 4 System Assembly Heatsink ′ Page: 4-16 PA-3122 SERIES USER S MANUAL...
  • Page 200 Chapter 4 System Assembly Mainboard ′ Page: 4-17 PA-3122 SERIES USER S MANUAL...
  • Page 201 Chapter 4 System Assembly ′ Page: 4-18 PA-3122 SERIES USER S MANUAL...

  • Page 202: Exploded Diagram For Printer

    Chapter 4 System Assembly EXPLODED DIAGRAM FOR PRINTER 3 Inch Printer ′ Page: 4-19 PA-3122 SERIES USER S MANUAL...
  • Page 203 Chapter 4 System Assembly ′ Page: 4-20 PA-3122 SERIES USER S MANUAL...
  • Page 204 Chapter 4 System Assembly 3 Inch Printer Cover ′ Page: 4-21 PA-3122 SERIES USER S MANUAL...
  • Page 205 Chapter 4 System Assembly 2 Inch Printer ′ Page: 4-22 PA-3122 SERIES USER S MANUAL...
  • Page 206 Chapter 4 System Assembly 2 Inch Printer Cover ′ Page: 4-23 PA-3122 SERIES USER S MANUAL...
  • Page 207 Chapter 4 System Assembly With Paper Holder Without Paper Holder ′ Page: 4-24 PA-3122 SERIES USER S MANUAL...

  • Page 208: Exploded Diagram For Msr

    Chapter 4 System Assembly EXPLODED DIAGRAM FOR MSR ′ Page: 4-25 PA-3122 SERIES USER S MANUAL...

  • Page 209: Exploded Diagram For Vfd

    Chapter 4 System Assembly EXPLODED DIAGRAM FOR VFD VFD Module ′ Page: 4-26 PA-3122 SERIES USER S MANUAL...
  • Page 210 Chapter 4 System Assembly Without VFD Module ′ Page: 4-27 PA-3122 SERIES USER S MANUAL...

  • Page 211: Exploded Diagram For Hdd

    Chapter 4 System Assembly EXPLODED DIAGRAM FOR HDD Do not cover breather hole. ′ Page: 4-28 PA-3122 SERIES USER S MANUAL...

Table of Contents