Protech Systems PA-6822 User Manual page 121

GS v 0 m xL xH yL yH d1 ... dk
[Name] Print raster bit image.
ASCII
[Format] Hex. Hex.
Decimal 29 118 48 m xL xH yL yH d1...dk Decimal 29 118 48 m xL xH yL yH d1...dk
m = 0, m = 48
0 ≤ xL ≤ 54(for 2 inch)
0 ≤ xL ≤ 72(for 3 inch)
0 ≤ xH ≤ 0
[Range]
0 ≤ yL ≤ 255
0 ≤ yH ≤ 3
0 ≤ d ≤ 255
k = (xL+xH×256) × (yL+yH×256) However, k ≠ 0 k = (xL+xH×256) × (yL+yH×256) However, k ≠ 0
Prints raster method bit images using mode m. Prints raster method bit images using mode m.
m
0, 48
xL and xH specify the horizontal direction da ta count for one bit image xL and xH specify the horizontal direction da
(xL + xH x 256) in bytes.
yL and yH specify the vertical direction data count for one bit image yL and yH specify the vertical direction data count for one bit image
(yL + yH x 256) in bytes.
[Description]
GS w n
[Name] Set bar code width.
ASCII
[Format] Hex.
Decimal 29 119 n
1 ≤ n ≤ 6
[Range]
Initial Value n = 2
PA-6822 Series User Manual
GS v 0 m xL xH yL yH d1...dk m xL xH yL yH d1...dk
1D 76 30 m xL xH yL yH d1...dk 1D 76 30 m xL xH yL yH d1...dk
Mode Density of Vert. Dir. Dots Density of Vert. Dir. Dots
Normal Mode 203 DPI
GS w n
1D 77 n
Chapter 3 Software
Density of Hor. Dir. Dots
203 DPI
Page 1