Protech Systems PA-6822 User Manual page 96

LF
[Name] Print and line feed
ASCII
[Format] Hex.
Decimal 10
[Range] N/A
Prints the data in the print buffer and performs a line feed based on the set line
[Description] feed amount.
FF
[Name] Print and recover to standard mode (in page mode)
ASCII
[Format] Hex.
Decimal 12
[Range] N/A
Prints all buffered data to the print region c ollectively, then recovers to the standard
mode.
[Description]
CR
[Name] Print and carriage return
ASCII CR
[Format] Hex. 0D
Decimal 13
[Range] N/A
When an automatic line feed is enabled, this command functions in the same
way as LF(print and line feed). When the automatic line feed is disabled, this
[Description] command is ignored.
CAN
[Name] Cancel print data in page mode
ASCII CAN
[Format] Hex. 18
Decimal 24
[Range] N/A
Deletes all print data in the currently set print region in page mode.
[Description]
PA-6822 Series User Manual
LF
0A
After execution, makes the top of the line the next print starting position.
FF
0C
All buffer data is deleted after printing.
The print area set by ESC W (Set print region in page mode) is reset to the
default setting.
No paper cut is executed.
Sets the print position to the beginning of the next line after execution.
This command is enabled only in page mode.
This command is ignored with serial interface models.
Sets the print position to the beginning of the next line after execution.
This command is enabled only in page mode.
Portions included in the currently set print region are also deleted, even if
previously set print region data.
Chapter 3 Software
Page