BIOS Setting
Device reset time-out
Device power-up delay
Device power-up delay in
seconds
Mass Storage Devices:
PA-6822 SERIES USER MANUAL
Options
10 / 20 / 30 / 40 sec
- Auto
- Manual
Multiple options ranging
from 0 to 40
- Auto
- Floppy
- Force FDD
- Hard Disk
- CD-ROM
Chapter 3 Software
Description/Purpose
USB mass storage device Start Unit
command time-out.
Maximum time the device will take before it
properly reports itself to the Host Controller.
'Auto' uses default value: for a Root port it is
100 ms, for a Hub port the delay is taken
from Hub descriptor.
Delay range is 1..40 seconds, in one second
increments
Display the device name and choose the
device emulation type.
Page 174