Protech Systems PA-6822 User Manual page 95

Kanji Control Commands
(when the Japanese, Simplified Chinese, Traditional Chinese, or Korean model
is used)
Hexadec
Control
-imal
Codes
Codes
<FS !> 1C 21
<FS &> 1C 26
<FS -> 1C 2D
<FS .> 1C 2E
<FS S> 1C 53
<FS W> 1C 57
Command classification
Executing : Printer executes the command, which does not then affect the following data.
Setting : Printer uses flags to make settings, and those settings affect the following data.
○: Enabled.
: Enabled only when the command is set at the beginning of a line.
◎
: Enabled only when data is not present in the printer buffer.
▲: Only value setting is possible.
Disabled: Parameters are processed as printable data.
Ignored: All command codes including parameters are ignored and nothing is executed.
COMMAND DETAILS
STANDARD COMMAND DETAILS
HT
[Name] Horizontal tab
ASCII
[Format] Hex.
Decimal 9
[Range] N/A
Moves print position to next horizontal tab position.
[Description]
PA-6822 Series User Manual
Set print mode(s) for Kanji characters
Select Kanji character mode
Turn underline
characters
Cancel Kanji character mode
Set Kanji character spacing
Turn quadruple-size mode on/off for Kanji
characters
HT
09
This command is ignored if the next tab is not set.
If the next tab position exceeds the print region, the print position is moved
to [print region + 1].
The horizontal tab position is set by ESC D (Set/cancel horizontal tab
position).
When the print position is at the [print region + 1] position and this
command is received, the current line buffer full is printed and a horizontal
tab is executed from the top of the next line.
The initial value of the horizontal tab position is every 8 characters of Font
th
A (the 9th, 17th, 25 positions, etc.)
Chapter 3 Software
Function
mode on/off for
Stand
Page
-ard
Mode
Mode
V V
V V
Kanji
V V
V V
V V
V V
Page