Protech Systems PA-6822 User Manual page 134

3-3-2-2. OPOS Driver
The MB4000_OposSetup.exe program sets up the registry information and example
program of VFD for OPOS program uses.
1. Installation
Below steps guide you to install the MB4000_OposSetup program.
Run the MB4000_OposSetup setup file
This setup also installs the Prox-PMP4000 program.
Follow the wizard instructions to complete the installation.
2. Launching Program
Below steps guide you to load the Prox-PMP4000 program.
Click LineDisplay folder from the path Start/Programs/Protech OPOS.
Click Prox-PMP4000 to launch the program.
PA-6822 Series User Manual
Chapter 3 Software
Page 1