Protech Systems PA-6822 User Manual page 123

Prints QRCode data based on the specified contents.
model: Specifies a model
e: Selects an error correction level.
v: =0: Automatic selection
(A version is automatically selected depending on the number of input data.)1 ≤
v ≤ 40 Fixed version (up to 14 for model-1)
mode: Specifies a mode of data.
[Description]
nl, nh: Specifies the number of data.
Data: Kanji data of the QRCode data should be set by Shift JIS code.
KANJI CONTROL COMMAND DETAILS
FS ! n
[Name] Set print mode(s) for Kanji characters.
[Format] ASCII
Hex.
Decimal 28 33 n
[Range] 0 ≤ n ≤ 255
Initial Value n = 0
[Description] Batch specifies the Kanji character print mode.
Bit
7
6
5
4
3
2
1
0
FS &
[Name] Select Kanji character mode.
ASCII
[Format] Hex.
Decimal 28 38
[Range] N/A
[Description] Specifies Kanji character mode.
PA-6822 Series User Manual
'L' (4CH), 'M' (4DH), 'Q' (51H), 'H' (48H)
Mode Hexadecimal
N 4E
A 41
B 42
K 4B
M 4D
FS ! n
1C 21 n
Function
Underline
Undefined
Undefined
Undefined
Double tall expanded
Expanded wide
Undefined
Undefined
FS &
1C 26
Chapter 3 Software
Mode
Numerical mode
Alphanumeric mode
8-bit byte mode
Kanji mode
Mixed mode
〝 0 〞 〝 1 〞
Off On
Off On
Off On
Page 1