Protech Systems PA-6822 User Manual page 98

Bit
0
1
2
3
4
5
6
7
DLE ENQ n
[Name] Real-time request to printer.
ASCII
[Format] Hex.
Decimal
[Range] 1 ≤ n ≤ 2
Responds to requests n specifications from the host in real-time. n specifications
are below.
n = 1: Recover from the error and start printing from the line where the error
occurred.
[Description]
n = 2: Recover from error after clearing the reception buffer and print buffer.
This command is enabled even when the printer specification is disabled by ESC
= (select
peripheral devices).
DLE DC4 n m t
[Name] Real-time output of specified pulse.
ASCII
[Format] Hex.
Decimal
n = 1
[Range] m = 0,1
1 ≤ t ≤ 8
This outputs a signal specified by t to the connector pin specified by m.
m = 0: #2 Pin of the drawer kick connector
[Description]
m = 1: #5 Pin of the drawer kick connector
On time is set to t x 100 msec; Off time is set to t x 100 msec.
PA-6822 Series User Manual
On / Off Hex Decimal
Off 00 0
Off 02 2
Off 00 0
On 04 4
Off 00 0
On 08 8
On 10 16
Off 00 0
On 20 32
Off 00 0
On 40 64
Off 00 0
DLE ENQ n
10 05 n
16 5 n
DLE DC4 n m t
10 14 n m t
16 20 n m t
Chapter 3 Software
Function
Not used. Fixed to Off.
Not used. Fixed to On.
No paper-near-end stop.
Printing stops due to paper near end.
No paper-near-end stop.
Printing stops due to paper near end.
Not used. Fixed to On.
No paper-end stop.
Printing stops due to paper end.
No paper-end stop.
Printing stops due to paper end.
Not used. Fixed to Off.
Page