Protech Systems PA-6822 User Manual page 110

ESC { n
[Name] Turns upside-down printing mode on/off.
ASCII
[Format] Hex.
Decimal
0 ≤ n ≤ 255
[Range]
Initial Value n = 0
Specifies or cancels upside-down printing.
[Description]
FS p n m
[Name] Print NV bit image.
ASCII
[Format] Hex.
Decimal
1 ≤ n ≤ 255
[Range]
0 ≤ m ≤ 3, 48 ≤ m ≤ 51
Prints NV bit image n using mode m.
[Description]
FS q n [xL xH yL yH d1...dk]1...[xL xH yL yH d1...dk]n
[Name] Define NV bit image.
ASCII
[Format] Hex.
Decimal
1 ≤ n ≤ 255
1 ≤ (xL + xH ×256) ≤ 54 (0 ≤ xL ≤ 54, xH=0) for 2 inch
1 ≤ (xL + xH ×256) ≤ 72 (0 ≤ xL ≤ 72, xH=0) for 3 inch
[Range]
1 ≤ (yL + yH ×256) ≤ 96 (0 ≤ yL ≤ 96, yH=0)
0 ≤ d ≤ 255
k = (xL + xH × 256) × (yL + yH × 256) × 8
PA-6822 Series User Manual
ESC { n
1B 7B n
27 123 n
Cancels upside-down printing when n = <*******0>H.
Specifies upside-down printing when n = <*******1>H.
n is effective only when it is the lowest bit.
This command is effective only when input at the top of the line when
standard mode is being used.
This command has no affect in page mode. In page mode, this command is
only effective for the setting.
Upside-down printing rotates line data 180 degrees.
n Upside-down mode
0 Turned off
1 Turned on
FS p n m
1C 70 n m
28 112 n m
m
0, 48
1, 49
2, 50
3, 51
n specifies the NV bit image number.
m specifies the bit-image mode.
NV bit image is a bit image defined in non-volatile memory by FS q and
printed by this command.
This command is ignored when the specified NV bit image n is undefined.
FS q n [xL xH yL yH d1...dk]1...[xL xH yL yH d1...dk]n
1C 71 n [xL xH yL yH d1...dk]1...[xL xH yL yH d1...dk]n
28 113 n [xL xH yL yH d1...dk]1...[xL xH yL yH d1...dk]n
Mode
Nornal
Double-width
Double-height
Quadruple
Chapter 3 Software
Page