6 Using the product
Parameter
Max.
2. End measurement:
3. Save measurement result: [Save].
Options
>
[Options]
values is displayed in a line graph (zoom function available [▲],
[▼]).
>
[Options]
in the same way.
>
[Options]
across the overall measuring time are displayed in a line graph.
6.2.9.2.
Flow pressure
Calling up the function:
>
[
1. Select
-
Measurement is started
The following values are displayed:
Parameter
Pressure
Min
Max.
2. End measurement:
3. Save measurement result: [Save].
Options
>
[Options]
values is displayed in a line graph (zoom function available [▲],
[▼]).
>
[Options]
in the same way.
>
[Options]
across the overall measuring time are displayed in a line graph.
70
Explanation
Highest pressure during the current
measurement
[
→
Show
Graphic: a section of past measuring
→ Manometer: the measuring values are displayed
→
Overall graphic
]
→
Measurements
Flow
pressure. [▲],
Explanation
Current pressure
Lowest pressure during the current
measurement
Highest pressure during the current
measurement
[
→
Show
Graphic: a section of past measuring
→ Manometer: the measuring values are displayed
→
Overall graphic
].
curve: the measuring values
→
[OK]
→
Controller test
[▼]
→ [OK].
].
curve: the measuring values
→ [OK].