Repeated Testing (Ps>0.5 Bar / Ps<=0.5 Bar) - TESTO 324 Instruction Manual

Carrying out a main test
1. Start measurement:
- The test pressure (target) is built up automatically by the
instrument.
- Zeroing starts (5 s)
Option
> End stability time early:
> End measurement period early:
-
- Pressure test is ended.
2. Evaluate measurement result: [▲],
- The measurement result is displayed
3. Save measurement result: [Save].
Options
> [Options]
values is displayed in a line graph (zoom function available [▲],
[▼])
> [Options]
in the same way.
> [Options]
default settings.
> [Options]
across the overall measuring time are displayed in a line graph.
6.2.5.3. Repeated testing (PS>0.5 bar / PS<=0.5 bar)
The aim of this testing is to establish, at the time of testing, whether
the pipe is in proper working condition for the intended application
and can satisfy the requirements until the next test.
Calling up the function:
> [
Repeated testing PS>0.5 bar
bar
[
Measurement is cancelled.
→ Show Graphic: a section of past measuring
→ Manometer: The measuring values are displayed
→ Factory
→ Overall graphic
] → Measurements
→ [OK].
].
[Next]
[Next]
[▼]
setting: the values are reset to the
curve: the measuring values
→ [OK] → Liquid gas (TRF)
or Repeated testing PS<=0.5
6 Using the product
→ [OK].
→
53