Controller Test - TESTO 324 Instruction Manual

6 Using the product
Carry out the steps according to the notes on the display and
confirm with [OK].
If the set test pressure (target) is greater than 300 mbar, the
test pressure must be built up manually.
Option
> End stability time early:
> End measurement period early:
-
2. Save measurement result: [OK].
Options
> [Options]
values is displayed in a line graph (zoom function available [▲],
[▼]).
> [Options]
parameters to be represented (max. 4) can be displayed (
hidden (
> [Options]
measuring values per display page.
> [Options]
in the same way.
> [Options]
during a measurement): The reading display menu is opened.
Up to 8 measurement parameters can be selected.
> [Options]
across the overall measuring time are displayed in a line graph.
6.2.9.

Controller test

There are 4 different test types to choose from:
Test type
Static pressure
Flow pressure
68
Measurement is cancelled.
→ Show Graphic: a section of past measuring
→ Configure
).
→ Number of
→ Manometer: the measuring values are displayed
→ Measurement
→ Overall graphic
Explanation
The static pressure measurement
enables defects in the pressure reducer
(controller) and the shut-off valve (ball
valve) upstream of the consumer to be
detected.
The flow pressure measurement enable
defects in the pressure reducer
(controller) to be detected.
[Next]
[ ]
Graphic: the measurement
lines: change the number of
view: (this function is not available
curve: the measuring values
) or