TESTO 324 Instruction Manual page 64

6 Using the product
Calling up the function:
> [
measurement
- Current measuring values are displayed
- Zeroing starts (5 s)
Option
Spot
measurement
Configure
measurement
view
1. Start measurement:
> End measurement period early:
-
2. Save measurement result: [OK].
Options
> >
values is displayed in a line graph (zoom function available [▲],
[▼]).
> [Options]
parameters to be represented (max. 4) can be displayed (
hidden (
> [Options]
measuring values per display page.
> [Options]
in the same way.
> [Options]
during a measurement): The reading display menu is opened.
Up to 8 measurement parameters can be selected.
> [Options]
available during a measurement): the reading display order can
be changed.
> [Options]
64
] → Measurements
→ [OK]
1. [Edit].
2. Edit program name: →
and sometimes [◄],
3. Save changes: [Finished].
1. Select the program: [▲],
2. Select
3. Select parameter: [▲],
(enabled),
4. Save changes: [Finished].
[
Measurement is cancelled.
[Options] → Show
→ Configure
).
→ Number of
→ Manometer: The measuring values are displayed
→ Measurement
→ Measurement view
→ Note: customer-specific notes can be stored.
→ [OK] → Programs
→ Enable.
[►]
Measurement
[ ] (disabled)
].
[
Graphic: a section of past measuring
Graphic: the measurement
lines: change the number of
view: (this function is not available
order: (this function is not
→ Spot
[Edit] → [▲], [▼]
→ [OK].
[▼] → [Edit].
view: [▼] → [Edit].
[▼] → [ ]
]
) or