Siemens SIPROTEC Manual page 683

Addr. Parameter
132 Teleprot. E/F
133 Auto Reclose
134 AR control mode
135 Synchro-Check
136 FREQUENCY Prot.
137 U/O VOLTAGE
138 Fault Locator
139 BREAKER FAILURE
140 Trip Cir. Sup.
141 REF PROT.
142 Therm.Overload
143 TRANSFORMER
144 V-TRANSFORMER
145 P. INTERFACE 1
146 P. INTERFACE 2
147 NUMBER OF RELAY
SIPROTEC, 7SD5, Manual
C53000-G1176-C169-5, Release date 02.2011
Setting Options Default Setting
Dir.Comp.Pickup Disabled
UNBLOCKING
BLOCKING
Disabled
1 AR-cycle Disabled
2 AR-cycles
3 AR-cycles
4 AR-cycles
5 AR-cycles
6 AR-cycles
7 AR-cycles
8 AR-cycles
ADT
Disabled
Pickup w/ Tact Trip w/o Tact
Pickup w/o Tact
Trip w/ Tact
Trip w/o Tact
Disabled Disabled
Enabled
Disabled Disabled
Enabled
Disabled Disabled
Enabled
Enabl. w. comp.
Disabled Disabled
Enabled
with BCD-output
Disabled Disabled
Enabled
enabled w/ 3I0>
Disabled Disabled
1 trip circuit
2 trip circuits
3 trip circuits
Disabled Disabled
Enabled
Disabled Disabled
Enabled
NO NO
YES
Not connected connected
connected
Enabled Enabled
Disabled
IEEE C37.94
Disabled Disabled
Enabled
IEEE C37.94
2 relays 2 relays
3 relays
4 relays
5 relays
6 relays
A.6 Functional Scope
Comments
Teleprotection for Earth fault over-
curr.
Auto-Reclose Function
Auto-Reclose control mode
Synchronism and Voltage Check
Over / Underfrequency Protection
Under / Overvoltage Protection
Fault Locator
Breaker Failure Protection
Trip Circuit Supervision
Restricted earth fault protection
Thermal Overload Protection
Transformer inside protection
zone
Voltage transformers
Protection Interface 1 (Port D)
Protection Interface 2 (Port E)
Number of relays
Appendix
683