Table of Contents
Advertisement
Input/Output Board C-I/O-2 up to Release 7SD5 .../EE
There are two different releases of the input/output board C-I/O-2 available. For devices up to the release
7SD5.../EE, the layout of the printed circuit board is shown in Figure 3-8, for devices of release 7SD5.../FF and
higher, it is shown in Figure 3-9.
Figure 3-8
The contact of the relay for the binary output BO13 can be configured as NO or NC contact (see also General
Diagrams in Appendix A, Section A.2):
with housing size
with housing size
SIPROTEC, 7SD5, Manual
C53000-G1176-C169-5, Release date 02.2011
Input/output board C-I/O-2 up to release 7SD5.../EE, with representation of the jumper settings
required for checking configuration settings
1
/
: No. 3 in Figure 3-3, slot 33,
2
1
/
: No. 3 in Figure 3-4, slot 33 right.
1
Mounting and Commissioning
3.1 Mounting and Connections
513
Advertisement
Table of Contents
