Measurement: Ph-Independent Free Chlorine - Emerson Rosemount 1056 Instruction Manual

Instruction Manual
LIQ-MAN-1056
The following sub-sections provide you with the initial display screen that appears for each configuration function.
Use the flow diagram for chlorine programming at the end of Sec. 6 and the Model 1056 live screen prompts
for each function to complete configuration and programming.

6.6.4.2 Measurement: pH-independent Free Chlorine

The display screen for selecting the measurement is
shown. The default value is displayed in bold type.
Refer to the chlorine Programming flow diagram to
complete this function.
6.6.4.3 Units
The display screen for selecting units as ppm or mg/L
is shown. The default value is displayed in bold type.
Refer to the Chlorine Programming flow diagram to
complete this function.
6.6.4.4 Filter
The display screen for entering the input filter value in
seconds is shown. The default value is displayed in
bold type. Refer to the Chlorine Programming flow
diagram to complete this function.
6.6.4.5 Resolution
The display screen for selecting display resolution as
0.001 or 0.01 is shown. The default value is displayed
in bold type. Refer to the Chlorine Programming flow
diagram to complete this function.
58
Section 6.0: Programming the Measurements
S1: 1.234µS/cm 25.0ºC
S2: 12.34pH 25.0ºC
SN Measurement
Free Chlorine
pH Independ. Free Cl
Total Chlorine
Monochloramine
S1: 1.234µS/cm 25.0ºC
S2: 12.34pH 25.0ºC
SN Units
ppm
mg/L
S1: 1.234µS/cm 25.0ºC
S2: 12.34pH 25.0ºC
SN Input filter
05 sec
S1: 1.234µS/cm 25.0ºC
S2: 12.34pH 25.0ºC
SN Resolution
0.001
0.01
April 2017