Emerson Rosemount 1056 Instruction Manual page 99

Instruction Manual
LIQ-MAN-1056
7.6.3.2 zeroing The Sensor
The adjacent screen will appear during Zero Cal. Be
sure sensor has been running in zero solution for at
least two hours before starting zero step.
The adjacent screen will appear if In Zero Cal is suc-
cessful. The screen will return to the Amperometric
Cal Menu.
The adjacent screen may appear if In Zero Cal is
unsuccessful. The
Amperometric Cal Menu.
7.6.3.3 In Process Calibration
The adjacent screen will appear prior to In Process Cal
If the In Process Cal is successful, the screen will
return to the Cal sub-menu.
The adjacent screen may appear if In Process Cal is
unsuccessful. The screen will return to the
Amperometric Cal Menu.
screen will return to the
Section 7.0: Calibration
S1: 1.234µS/cm 25.0ºC
S2: 12.34pH 25.0ºC
SN Zero Cal
Zeroing
Wait
S1: 1.234µS/cm 25.0ºC
S2: 12.34pH 25.0ºC
SN Zero Cal
Sensor zero done
S1: 1.234µS/cm 25.0ºC
S2: 12.34pH 25.0ºC
SN Zero Cal
Sensor zero failed
Press EXIT
S1: 1.234µS/cm 25.0ºC
S2: 12.34pH 25.0ºC
SN InProcess Cal
Wait for stable
reading.
S1: 1.234µS/cm 25.0ºC
S2: 12.34pH 25.0ºC
SN InProcess Cal
Calibration
Error
Press EXIT
April 2017
91