Calibration — K Factor; Calibration — Freq/Velocity And Pipe - Emerson Rosemount 1056 Instruction Manual

Instruction Manual
LIQ-MAN-1056
To calibrate Pulse Flow scroll to the desired item and
press ENTER.
The following sub-sections provide you with the initial
display screen that appears for each calibration rou-
tine. Use the diagram for Pulse Flow calibration at
the end of Sec. 7 and the live screen prompts to com-
plete calibration.
7.11.2 Calibration — K Factor
This screen appears after selecting K Factor.
.
To calibrate Pulse Flow scroll to the desired item and
press ENTER.
The following sub-sections provide you with the initial
display screen that appears for each calibration rou-
tine. Use the diagram for Pulse Flow calibration at
the end of Sec. 7 and the live screen prompts to com-
plete calibration.
.
7.11.3 Calibration — Freq/Velocity and Pipe
This screen appears after selecting Freq/Velocity &
Pipe calibration.
After completing the entry of the Freq/Velocity ratio, the
following screen will appear:
The following screen will appear if the entries are suc-
cessful. The screen will return to the Pulse Flow Cal
Menu.
S1: 1.234µS/cm
.
S2: 12.34pH
SN Calibration
K Factor: 12.34 p/Gal
Freq/Velocity & Pipe
In Process
Totalizer Control
S1: 1.234µS/cm
S2: 12.34pH
SN K Factor
12.34 p/Gal
S1: 1.234µS/cm
S2: 12.34pH
SN Calibration
K Factor: 12.34 p/Gal
Freq/Velocity & Pipe
In Process
Totalizer Control
Simply enter the know K factor provided with the flow
sensor specifications. The screen will return to the
Pulse Flow Cal Menu and the updated K factor will
appear.
S1: 1.234µS/cm
S2: 12.34pH
SN Freq/Velocity
12.34 Hz per ft/sec
S1: 1.234µS/cm
S2: 12.34pH
SN Pipe Diameter
10.00 in
S1: 1.234µS/cm
S2: 12.34pH
SN Freq/Velocity&Pipe
Updated K Factor
12.34 p/Gal
Section 7.0: Calibration
April 2017
25.0ºC
25.0ºC
25.0ºC
25.0ºC
25.0ºC
25.0ºC
25.0ºC
25.0ºC
25.0ºC
25.0ºC
25.0ºC
25.0ºC
103