Display And Operation; User Interface; Instrument Keypad; Function Keys - Emerson Rosemount 1056 Instruction Manual

Instruction Manual
LIQ-MAN-1056

4.1 User Interface

The 1056 has a large display which shows two live
measurement readouts in large digits and up to four
additional process variables or diagnostic parameters
concurrently. The display is back-lit and the format can
be customized to meet user requirements.
itive menu system allows access to Calibration, Hold (of
current outputs), Programming, and Display functions by
pressing the MENU button. In addition, a dedicated
DIAGNOSTIC button is available to provide access to
useful operational information on installed sensor(s)
and any problematic conditions that might occur. The
display flashes Fault and/or Warning when these condi-
tions occur. Help screens are displayed for most fault
and warning conditions to guide the user in trou-
bleshooting.
During calibration and programming, key presses cause
different displays to appear. The displays are self-
explanatory and guide the user step-by-step through
the procedure.

4.2 Instrument Keypad

There are 4 Function keys and 4 Selection keys on the
instrument keypad.

Function keys:

The MENU key is used to access menus for program-
ming and calibrating the instrument. Four top-level
menu items appear when pressing the MENU key:
 Calibrate: calibrate attached sensors and
analog outputs.
 Hold: Suspend current outputs.
 Program: Program outputs, measurement,
temperature, security and reset.
 Display: Program display format, language,
warnings, and contrast
Pressing MENU always causes the main menu screen
to appear. Pressing MENU followed by EXIT causes
the main display to appear.
Section 4.0

Display and Operation

4.1 User Interface
4.2 Keypad

4.3 Main Display

4.4 Menu System

The intu-
Section 4.0: Display and Operation
April 2017
29