Emerson Rosemount 1056 Instruction Manual page 101

Instruction Manual
LIQ-MAN-1056
The following sub-sections provide you with the initial
display screen that appears for each calibration
Use the flow diagram for Chlorine
routine.
calibration at the end of Sec. 7 and the live screen
prompts to complete calibration.
The adjacent screen appears after selecting pH-inde-
pendent free chlorine calibration:
7.6.4.2 zeroing The Sensor
The adjacent screen will appear during Zero Cal
The adjacent screen will appear if In Zero Cal is suc-
cessful. The screen will return to the Amperometric
Cal Menu.
The adjacent screen may appear if In Zero Cal is
unsuccessful. The screen will return to the
Amperometric Cal Menu.
7.6.4.3 In Process Calibration
The following screen will appear prior to In Process Cal
If the In Process Cal is successful, the screen will
return to the Cal sub-menu.
The adjacent screen may appear if In Process Cal is
unsuccessful. The screen will return to the
Amperometric Cal Menu.
Section 7.0: Calibration
S1: 1.234µS/cm 25.0ºC
S2: 12.34pH 25.0ºC
SN Calibration
Zero Cal
In Process Cal
S1: 1.234µS/cm 25.0ºC
S2: 12.34pH 25.0ºC
SN Zero Cal
Zeroing
Wait
S1: 1.234µS/cm 25.0ºC
S2: 12.34pH 25.0ºC
SN Zero Cal
Sensor zero done
S1: 1.234µS/cm 25.0ºC
S2: 12.34pH 25.0ºC
SN Zero Cal
Sensor zero failed
Press EXIT
S1: 1.234µS/cm 25.0ºC
S2: 12.34pH 25.0ºC
SN InProcess Cal
Wait for stable
reading.
S1: 1.234µS/cm 25.0ºC
S2: 12.34pH 25.0ºC
SN InProcess Cal
Calibration
Error
Press EXIT
April 2017
93