Calibrating The Sensor In Air; Calibrating The Sensor Against A Standard Instrument (In Process Cal) - Emerson Rosemount 1056 Instruction Manual

Instruction Manual
LIQ-MAN-1056
7.7.2 zeroing The Sensor
The adjacent screen will appear during Zero Cal
The adjacent screen will appear if In Zero Cal is suc-
cessful. The screen will return to the Amperometric
Cal Menu.
The adjacent screen may appear if In Zero Cal is
unsuccessful. The screen will return to the
Amperometric Cal Menu.

7.7.3 Calibrating The Sensor In Air

The adjacent screen will appear prior to Air Cal
The adjacent screen will appear if In Air Cal is suc-
cessful. The screen will return to the Amperometric
Cal Menu.
The adjacent screen will appear if In Air Cal is suc-
cessful. The screen will return to the Amperometric
Cal Menu.
7.7.4 Calibrating The Sensor Against A Standard
Instrument (In Process Cal)
The adjacent screen will appear prior to In Process Cal
If the In Process Cal is successful, the screen will
return to the Cal sub-menu.
The adjacent screen may appear if In Zero Cal is
unsuccessful. The screen will return to the
Amperometric Cal Menu.
96
S1:
S2:
SN Zero Cal
.
Zeroing
Wait
S1:
S2:
SN Zero Cal
Sensor zero done
S1:
S2:
SN Zero Cal
Sensor zero failed
Press EXIT
S1: 1.234µS/cm
S2: 12.34pH
SN Air Cal
Start Calibration
Setup
S1: 1.234µS/cm
S2: 12.34pH
Done
S1: 1.234µS/cm
S2: 12.34pH
Failure
Check Sensor
Press EXIT
S1: 1.234µS/cm
S2: 12.34pH
SN InProcess Cal
Wait for stable
reading.
S1: 1.234µS/cm
S2: 12.34pH
SN InProcess Cal
Calibration
Error
Press EXIT
Section 7.0: Calibration
1.234 nA
1.456 nA
1.234 nA
1.456 nA
1.234 nA
1.456 nA
25.0ºC
25.0ºC
25.0ºC
25.0ºC
SN Air Cal
25.0ºC
25.0ºC
SN Air Cal
25.0ºC
25.0ºC
25.0ºC
25.0ºC
April 2017