Leica GPS1200 Field Manual page 72

72
For <Show Codes: All Codes>
Step Field
1. <Code:>
2. <Code
Type:>
3. <Linework:> Select an option for the Linework flag to be stored with the
4. -
5. -
6. -
-
-
-
Description for thematical coding
With codelist
Select a code from the
choicelist. Point, line and
area codes are available for
selection.
<None> to store a point
without code or to perform
Linework without coding.
The type of the selected
code. This field is an output
field. It can not be changed.
point.
----- to store a point without Linework.
OCUPY (F1)
STOP (F1)
STORE (F1)
• If a point code was selected, the point is stored with the
selected code.
• If a line/area code was selected, the point is stored as
part of the line/area.
• Depending on the selection for <Linework:>, a
line/area is opened/closed.
GPS1200
Without codelist
Type in a code.
----- to store a point without
code or to perform Linework
without coding.
Select the type of the
entered code.
Linework