Leica GPS1200 Field Manual page 17

Battery
SHIFT
Quick coding
User Interface
Icon Description
The internal memory is the active memory device.
No icon The CompactFlash card is the active memory device. No
CompactFlash card inserted.
The status and source of the battery is displayed. The remaining power in the battery
is indicated by six levels.
For GPS1200 receivers: If two internal batteries are inserted, the battery with the
lower voltage is used. If an external power supply is connected and one or two
internal batteries are inserted, then the external power is used.
For GRX1200 Pro/GRX1200 GG Pro receivers: If two external power supplies are
attached, then the system uses the one which is configured as the preferred power
supply.
Touch screen: Tapping the icon leads to STATUS Memory & Battery, Battery
page.
.
Icon Description
For GPS1200 receivers: One internal battery in battery
compartment A is in use.
For GPS1200 receivers: One internal battery in battery
compartment B is in use.
For GPS1200 receivers: Two internal batteries, one in each
battery compartment A and B. Black indicates the battery
currently in use.
For GPS1200 receivers: External battery attached and in use.
For RX1250: Internal battery is in use.
The status of the SHIFT key is displayed.
Touch screen: Tapping the icon shows additional softkeys.
.
Icon Description
Additional softkeys are available in the currently visible screen.
The SHIFT key has been pressed.
The quick coding is displayed.
Touch screen: Tapping the icon turns the quick coding on or off.
.
Icon Description
Quick coding is turned on. Quick codes with one digit are used
from the active codelist.
GPS1200 17