Leica GPS1200 Field Manual page 104

CONFIGURE
Coding & Line-
work,
Linework page
104
Next step
PAGE (F6) changes to the Linework page.
The flags for Linework are defined on this screen.
The flags defined on this screen are linked to the options available for <Linework:>
in a display mask of an application program. The selection for <Linework:> in a
display mask determines the flag stored with a point. The availability of <Linework:>
in a display mask is configured in CONFIGURE Define Display Mask n.
Description of fields
Field Option
<Begin User input
Line:>
<3pt Curve:> User input
<ReOpen User input
Last Line:>
<End Line:> User input
<Cont User input
Line/Area:>
<Start User input
Spline:>
<End User input
Spline:>
<Cont User input
Spline:>
<Begin User input
Area:>
<ReOpen User input
Last Area:>
<Close User input
Area:>
Next step
CONT (F1) returns to the screen from where CONFIGURE Coding & Linework was
accessed.
Description
Opens a new line when the next point is stored.
Any lines which are currently open are closed.
The point may or may not be stored with a point
code.
Stores the linework flag for a curve through
three points and continues a line/area.
Opens the last used line again.
Closes all open lines.
Indicates a line/area is open.
Stores the linework flag for beginning a spline
and continues any open line/area.
Stores the linework flag to stop a spline.
Indicates a line/area is open with spline line
type.
Opens a new area when the next point is stored.
Any areas which are currently open are closed.
The point may or may not be stored with a point
code.
Opens the last used area again.
Closes all open areas.
GPS1200 Config...\Survey Settings...