Leica GPS1200 Field Manual page 69

Linework
Field Option
ReOpen Any
Area
ReOpen Last
Area
Close Area
Next step
Step Description
1. Go to the point to be occupied.
2. Select the linework flag to be stored with the next point.
3. OCUPY (F1)
4. STOP (F1)
5. STORE (F1)
Depending on the option selected for <Linework:>, a line/area is opened,
closed or re-opened.
6. Repeat steps 1. to 5. until all points are occupied.
7. SHIFT QUIT (F6) to exit the Survey application program.
8. Use a format file to export the points including the linework flags.
Description
Opens an area from a list of all lines which are
currently stored in the job when the next point is
stored. The last code used with the reopened
area is automatically selected when the point is
stored. Any line/area which is currently open is
closed and the last point belonging to that
line/area is given the End Line/Close Area line-
work flag.
Opens the last used area again. The last code
used with the reopened area is automatically
selected when the point is stored.
Closes all open areas.
GPS1200 69