Leica GPS1200 Field Manual page 183

STATUS
Description of fields
The data being received from the satellites and the layout of the screen depend on
the active real-time data format.
Field Description
<Sat PRN:> The PRN number (GPS) or the slot number (GLONASS) of the
satellites shown with the prefix G (GPS) or R (GLONASS).
<Sat Time:> The GPS time of the satellite.
<Phase L1:>, The number of phase cycles from the antenna to the satellite on
<Phase L2:> L1 and L2.
<Msg 18 L1:>, The uncorrected carrier phases for L1 and L2.
<Msg 18 L2:>
<Msg 20 L1:>, The carrier phase corrections for L1 and L2.
<Msg 20 L2:>
<Code L1:>, The pseudorange between the antenna to the satellite for L1
<Code L2:> and L2.
<Msg 19 L1:>, The uncorrected pseudoranges for L1 and L2.
<Msg 19 L2:>
<Msg 21 L1:>, The pseudorange corrections for L1 and L2.
<Msg 21 L2:>
<PRC:> Pseudorange corrections.
<RRC:> Rate of change of the corrections.
<IODE:> Issue Of Data Ephemeris. The identification number of the
ephemeris for a satellite.
Next step
CONT (F1) returns to the screen from where STATUS Real-Time Input Data was
accessed.
CONT (F1)
SAT- (F2)
SAT+ (F3)
GPS1200
To return to STATUS Real-Time.
To display information about the
satellite with the next smaller PRN.
To display information about the
satellite with the next larger PRN.
183