Configuration Of A Reference Real-Time Interface - Leica GPS1200 Field Manual

20.2.3

Configuration of a Reference Real-Time Interface

Access
CONFIGURE
Real-Time Mode
Config...\Interfaces... - General
Select Main Menu: Config...\Interfaces.... Highlight Real-Time. EDIT (F3).
The available fields and keys on this screen depend on the selected settings.
Two real-time devices can be attached to two different ports, for example a radio and
a digital cellular phone. On the reference, the two devices can operate simultane-
ously. Press SHIFT RT-2 (F2) to configure a second real-time interface.
Description of fields
Field Option
<R-Time None, Refer-
Mode:> ence or Rover
<R-Time Leica
Data:>
CMR
CMR+
CONT (F1)
REF (F2)
RATES (F3)
SRCH (F4)
DEVCE (F5)
SHIFT RT-2 (F2)
SHIFT SBAS (F5)
Description
<R-Time Data: Reference> activates a refer-
ence real-time interface.
The proprietary Leica real-time GPS data
format. This is recommended when working
exclusively with Leica receivers.
CMR and CMR+ are compacted formats used to
broadcast data for third party receivers.
GPS1200
To accept changes and return to the
screen from where this screen was
accessed.
To configure additional settings rele-
vant to reference, e.g. time slicing.
To configure the data rates for the
selected real-time data format.
Available on RX1250 with <Port:
Bluetooth x> and a Bluetooth device
being selected. To search for all
available Bluetooth devices. If more
than one Bluetooth device is found a
list of available devices is provided.
Available unless <Port: NETx>. To
create, select, edit or delete a device.
To accept the settings and configure
a second reference real-time inter-
face.
To configure the Space-Based
Augmentation System to be used.
133