Leica GPS1200 Field Manual page 150

150
Field Option
<Port:>
Bluetooth x
Port 1
<Device:> Output
<Bluetooth x>
<ID Output
Address:>
Next step
CONT (F1) returns to the screen from where CONFIGURE SmartAntenna Inter-
face was accessed. A connection to the SmartAntenna is established.
Description
Port to which the SmartAntenna will be
connected.
The Bluetooth port which will be used for the
interface functionality. Enables cablefree
communication between the SmartAntenna and
the RX1250.
LEMO port on RX1250. To be selected when
RX1250 and SmartAntenna are connected via
USB cable.
The device that is currently configured to
<Port:>.
The Bluetooth device inside the RX1250 that is
currently configured to <Port:>.
The ID address of the SmartAntenna to be used.
GPS1200 Config...\Interfaces... - General