Leica GPS1200 Field Manual page 140

CONFIGURE
Additional Rover
Options,
General page
140
Field Option
<Ref Choicelist
Antenna:>
Next step
ROVER (F2) accesses CONFIGURE Additional Rover Options, General page.
The available fields depend on the selected <R-Time Data:> in CONFIGURE Real-
Time Mode.
Description
The antenna used at the reference. If the real-
time data format does not contain the informa-
tion of the antenna certain corrections based on
the information of the antenna are applied in
order to provide correct results. The real-time
data formats Leica, RTCM v2.3, CMR and
CMR+ contain this information.
If the reference data is corrected by
absolute antenna calibration values
and a Leica standard antenna is being
used on the rover, select ADVNUL-
LANTENNA as reference antenna.
CONT (F1)
To accept changes and return to the
screen from where this screen was
accessed.
GGA (F4)
To activate the sending of a GGA
message for reference network appli-
cations.
GETID (F5)
Available for <Accept Ref: User
Defined>. To display and select the
station ID of the available reference
stations, the latency of the message
and the data format. When using
radios, the radio channel can be
switched and the stations received on
the new frequency are displayed.
1st (F6)
Available for <Accept Ref: First
Received>. To force the system to
try to establish a new connection with
a different reference station.
GPS1200 Config...\Interfaces... - General