Leica GPS1200 Field Manual page 141

Config...\Interfaces... - General
Description of fields
Field Option
<Accept User Defined
Ref:>
First Received
Any Received
<Ref Stn ID:> User input
<Ref
Network:>
None
Nearest
i-MAX
MAX
VRS
FKP
<Send User Yes or No
ID:>
<User ID 1:> User input
and
<User ID 2:>
<RTCM 1.x, 2.1, 2.2 or
Version:> 2.3
Description
Incoming real-time data is accepted from the
reference station defined in <Ref Stn ID:>.
Incoming real-time data from the first recog-
nised reference station is accepted.
Incoming real-time data from any reference
station is accepted.
Available for <Accept Ref: User Defined>.
The special ID of the reference station from
which real-time data is to be received.
Defines the type of reference network to be
used.
To survey without reference station network.
The rover sends its position via NMEA GGA
message to LEICA GPS Spider. From this posi-
tion, LEICA GPS Spider determines the refer-
ence in a reference network that is closest to the
rover.
The rover sends its position via NMEA GGA
message to LEICA GPS Spider where the
Master-Auxiliary corrections are calculated. The
corrections are also individualsied by LEICA
GPS Spider, which means it determines the best
suitable corrections for that rover.
The rover typically does not send its position to
LEICA GPS Spider. LEICA GPS Spider calcu-
lates and sends Master-Auxiliary corrections to
the rover. The rover individualises the correc-
tions for its position, which means it determines
the best suitable corrections.
If this option is selected, a NMEA GGA message
must be activated using GGA (F4).
Area correction parameters.
Activates the sending of a Leica proprietary
NMEA message defining the user.
Available for <Send User ID: Yes>.
The specific user ID's to be sent as part of the
Leica proprietary NMEA message. By default
the serial number of the instrument is displayed.
Available for <R-Time Data: RTCM XX v2> in
CONFIGURE Real-Time Mode.
The same version must be used at the reference
and the rover.
GPS1200 141