Leica GPS1200 Field Manual page 50

MANAGE
XX Point,
Code page
50
The setting for <Thematc Codes:> in CONFIGURE Coding & Linework deter-
mines the availability of the subsequent fields and softkeys. For <Thematc Codes:
Without Codelist> none of the keys is available except for STORE (F1).
Description of fields
Field Option
<Point Choicelist
Code:>
<Code:> User input
<Attribute User input
n:>
STORE (F1)
To store the point and all associated
information and to return to
MANAGE Data: Job Name, Points
page.
NEW-A (F2)
To create additional attributes for the
point code.
NAME (F3) or VALUE (F3)
Available for attributes for which an
attribute name can be typed in.
To highlight <Attribute n:> or the
field for the attribute value. The name
of <Attribute n:> can be edited and
an attribute value can be typed in.
LAST (F4)
To recall the last used attribute
values which were stored with this
point code.
DEFLT (F5)
To replace all currently displayed
attribute values with the default
values.
Description
Available for <Thematc Codes: With
Codelist>. All point codes of the job codelist can
be selected. The description of the code is
shown as an output field. The attributes are
shown as output, input or choicelist fields
depending on their definition.
Available for <Thematc Codes: Without
Codelist>. The code to be stored with the point.
A check is performed to see if a point code of
this name already exists in the job. If so, the
according attribute values are shown.
Available for <Thematc Codes: Without
Codelist>. Up to eight attribute values are avail-
able.
GPS1200 Manage...\Data