Entering Pattern Def; Using Pattern Def - HEIDENHAIN TNC 620 User Manual

Entering PATTERN DEF

Select the Programming mode of operation
Press the special functions key
Select the functions for contour and point
machining
Open a PATTERN DEF block
Select the desired machining pattern, e.g. a single
row
Enter the required definitions, and confirm each
entry with the ENT key

Using PATTERN DEF

As soon as you have entered a pattern definition, you can call it
with the CYCL CALL PAT function "Calling a cycle", page 48. The
TNC then performs the most recently defined machining cycle on
the machining pattern you defined.
A machining pattern remains active until you define
a new one, or select a point table with the SEL
PATTERN function.
You can use the mid-program startup function
to select any point at which you want to start or
continue machining (see User's Manual, Test Run
and Program Run sections)see "Any entry into
program (mid-program startup)".
TNC 620 | User's Manual Cycle Programming | 3/2014
PATTERN DEF pattern definition
2
2.3
55