HEIDENHAIN TNC 620 User Manual page 330
Cnc
Hide thumbs
Also See for TNC 620:
- User manual (840 pages) ,
- User manual (669 pages) ,
- User manual (521 pages)
Table of Contents
Advertisement
15
Touch Probe Cycles: Automatic Datum Setting
15.3 DATUM RIDGE CENTER (Cycle 409, DIN/ISO: G409, software option
17)
Probe TS axis: Coord. 1st axis Q382 (absolute):
Coordinate of the probe point in the reference axis
of the working plane at which point the datum is
to be set in the touch probe axis. Only effective if
Q381 = 1st input range -99999.9999 to 99999.9999
Probe TS axis: Coord. 2nd axis Q383 (absolute):
Coordinate of the probe point in the minor axis of
the working plane at which point the datum is to be
set in the touch probe axis. Only effective if Q381 =
1. Input range -99999.9999 to 99999.9999
Probe TS axis: Coord. 3rd axis Q384 (absolute):
Coordinate of the probe point in the touch probe
axis, at which point the datum is to be set in the
touch probe axis. Only effective if Q381 = 1. Input
range -99999.9999 to 99999.9999
New datum in TS axis Q333 (absolute): Coordinate
in the touch probe axis at which the TNC should
set the datum. Default setting = 0. Input range
-99999.9999 to 99999.9999
330
TNC 620 | User's Manual Cycle Programming | 3/2014
Advertisement
Table of Contents
