HEIDENHAIN TNC 620 User Manual page 351

Hide thumbs Also See for TNC 620:

Table of Contents

DATUM FROM OUTSIDE OF CORNER (Cycle 414, DIN/ISO: G414,

software option 17)

Probe TS axis: Coord. 2nd axis Q383 (absolute):

Coordinate of the probe point in the minor axis of

the working plane at which point the datum is to be

set in the touch probe axis. Only effective if Q381 =

1. Input range -99999.9999 to 99999.9999

Probe TS axis: Coord. 3rd axis Q384 (absolute):

Coordinate of the probe point in the touch probe

axis, at which point the datum is to be set in the

touch probe axis. Only effective if Q381 = 1. Input

range -99999.9999 to 99999.9999

New datum in TS axis Q333 (absolute): Coordinate

in the touch probe axis at which the TNC should

set the datum. Default setting = 0. Input range

-99999.9999 to 99999.9999

TNC 620 | User's Manual Cycle Programming | 3/2014