HEIDENHAIN TNC 620 User Manual page 400

Hide thumbs Also See for TNC 620:

Table of Contents

Touch Probe Cycles: Automatic Workpiece Inspection

16.9 MEASURE INSIDE WIDTH (Cycle 425, DIN/ISO: G425, software

Tool for monitoring Q330: Definition of whether

the TNC is to monitor the tool (see "Tool

monitoring", page 378). Input range 0 to 32767 .9,

alternatively tool name with maximum of 16

0: Monitoring inactive

Set-up clearance Q320 (incremental): Additional

distance between measuring point and ball tip.

Q320 is added to SET_UP (touch probe table), and

is only effective when the datum is probed in the

touch probe axis. Input range 0 to 99999.9999

Traversing to clearance height Q301: definition

of how the touch probe is to move between the

measuring points:

0: Move at measuring height between measuring

1: Move at clearance height between measuring

0: Tool number in the tool table TOOL.T

TNC 620 | User's Manual Cycle Programming | 3/2014